WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Honeywell Marine LIDEC PCB 2W M13294 (M13294-01) Rev.C3 – Level Switch Board for Enraf L20-70D

Item Code:

M13294-01 / Rev.C3

Brand:

HONEYWELL MARINE (ENRAF)

Condition:

Refurbished


Honeywell Marine LIDEC PCB 2W M13294 (M13294-01) Rev.C3 – Level Switch Electronic Board for Enraf LIDEC L20-70D

Product Information

Manufacturer Honeywell Marine (Honeywell Enraf Marine, formerly Enraf Marine Systems)
Label on Board M13294-Rev.C3
Part Number M13294 (also listed as M13294-01)
Revision Rev. C3
Serial Numbers (pieces shown) E2305103 and E2305035 (two boards)
Product Type LIDEC PCB 2W – two-wire electronic board for LIDEC level switch / water ingress detector
Construction Round, resin-potted board with green plug-in terminal blocks (1-2-3, − / + and a 2-way block) and adjustment potentiometers
Country of Manufacture Not clearly visible in the supplied photograph
Condition Refurbished
Supplier SM MARINE SERVICE™

Product Introduction

The Honeywell Marine M13294 is the LIDEC PCB 2W – the electronic board used in the Honeywell (Enraf Marine) LIDEC level switch. LIDEC detectors such as the L20-70D are fitted in cargo holds, bilges and pump rooms of bulk carriers and tankers to raise an alarm when water or liquid reaches the probe. SM MARINE SERVICE™ supplies the M13294 board as a replacement spare for ships worldwide through https://www.smmarineservice.com/.

What Is This Equipment?

A LIDEC level detector has three main parts: the stainless steel probe in the tank or hold, the electronic board in the connecting box, and the alarm panel / power supply. The M13294 is that electronic board. It drives the probe, checks whether liquid is touching it, and sends the result to the alarm system over a two-wire (2W) loop. Honeywell also supplies the board as sub-assemblies: M13876-01 (LIDEC sub/ass with 1x PCB M13294) and M13878-01 (LIDEC sub/ass with 2x PCB M13294) for single and double detector boxes.

Main Features

  • Genuine Honeywell Marine board, label M13294-Rev.C3
  • Two-wire (2W) loop design – power and signal on the same pair
  • Resin-potted round board, protected against moisture and vibration
  • Plug-in green terminal blocks for quick replacement on board
  • Adjustment potentiometers for sensitivity / alarm setting
  • Used in Water Ingress Detection Systems (WIDS) and pump room alarm systems

Honeywell Marine M13294 Rev.C3 LIDEC PCB 2W level switch board for Enraf L20-70D - SM MARINE SERVICE
Honeywell Marine M13294-Rev.C3 LIDEC PCB 2W (serials E2305103, E2305035) – SM MARINE SERVICE™

Main Technical Specifications

Typical data for the LIDEC L20-70D level detector system (Honeywell Marine manual NT406E); exact values for this board revision are not verified.

Measuring principle Surface (mechanical) waves generated in the metal probe by a piezoelectric ceramic
Supply voltage (system) 16 to 28 VDC, 24 VDC nominal
Output (L20-70D) Current loop, 18 mA / 6 mA, fail-safe
Probe cable Up to 30 m between probe and board
Hazardous area Intrinsically safe system (Ex ia) when used with the approved barrier
Board connections 3-way terminal (1-2-3), 2-way terminal marked − / +, additional 2-way terminal

Inside the Unit: PCBs, Modules & Part Numbers

M13294 / M13294-01 – LIDEC PCB 2W (this product)

Main electronic board of the LIDEC level switch: probe drive and detection circuit, alarm logic and two-wire output.

M13876-01 – LIDEC Sub-Assembly with 1x PCB M13294

Single-channel sub-assembly built with one M13294 board.

M13878-01 – LIDEC Sub-Assembly with 2x PCB M13294

Dual-channel sub-assembly built with two M13294 boards.

32269 – Assembled Probe

Stainless steel LIDEC L20-70D probe with cable that connects to the LIDEC board.

M12027 / 34231 / 25789 – Other LIDEC Boards

M12027 current output board, 34231 L20-70D WIDS current output PCB and 25789 dry contact (relay) board are other LIDEC boards used in L20-70D / L20-70DR versions. Interchangeability with M13294 is not verified – please send your old board label.

Main Components & Related Units

  • LIDEC L20-70D level detector (current output) – box versions M31999 (polyester), M34227 (stainless steel), M34229 (dual box with test switch)
  • LIDEC L20-70DR (relay output) – M32017, M36114
  • Probe P/N 32269
  • Zener barrier, power supply and alarm panel of the Water Ingress Detection System

Marine & Industrial Applications

  • Water Ingress Detection Systems (WIDS) in cargo holds of bulk carriers
  • Pump room bilge alarm systems on oil and chemical tankers
  • Bilge, void space and cofferdam high-level alarms
  • Tank high-level alarm points

Common Problems & Troubleshooting

  • No detection: check the probe connection, the loop wiring and the supply voltage.
  • Permanent alarm: check for a damaged probe cable, moisture in the connecting box or a failed board.
  • Wrong output level: check that the board type matches the system (2-wire current loop vs. relay output).
  • Function test: squeeze the probe tip between your fingers – the alarm output should change.
  • Safety: isolate power before work, keep the intrinsic-safety barrier in the circuit, and do not change factory-sealed potentiometers.

Maintenance Tips

  • Keep the connecting box dry and the cable glands tight.
  • Match the board to its probe channel (low / high alarm) when replacing.
  • Note the old board's label and settings before removal.
  • Test each detector after replacement and at planned maintenance intervals.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies the Honeywell M13294 LIDEC PCB and related LIDEC spares (probe 32269 and sub-assemblies). For a quotation please send the board label (part number and revision), the detector box type (for example L20-70D, M31999), the quantity and the vessel name. A photo of the old board helps us match it exactly.

Worldwide Supply & Shipping

We supply marine spare parts to ship owners, managers and repair yards in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Rotterdam, Hamburg, Piraeus, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta), the Americas (Houston, Panama, Santos, Buenos Aires, Callao) and Africa. Parts are shipped by courier to the vessel's agent or to our customer's office.

Why This Equipment Is Still Used

Many bulk carriers and tankers use Honeywell / Enraf LIDEC detectors for water ingress and pump room alarms. The system is simple, has no moving parts and is approved by class, so owners replace only the failed board or probe instead of changing the whole system.

FAQ

What is Honeywell M13294?
It is the LIDEC PCB 2W, the electronic board of the Honeywell Marine LIDEC level switch.

Is M13294 the same as M13294-01?
M13294-01 is the full part number listed for the LIDEC PCB 2W; the board label shows M13294 with the revision (Rev.C3).

Which sub-assemblies use this board?
M13876-01 (1x PCB M13294) and M13878-01 (2x PCB M13294).

Does it work with probe 32269?
Probe 32269 is the LIDEC L20-70D probe; please confirm your system type with us before ordering.

Can M13294 replace M12027?
Not verified. Send us the label of your old board and we will check.

What does "2W" mean?
Two-wire: the board is powered and sends its alarm signal over the same pair of wires.

Where is this board used on a ship?
In the connecting box of LIDEC detectors for cargo hold water ingress, bilge and pump room alarms.

What condition is this board?
Refurbished.

Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships marine spare parts worldwide.

Short Product Description

Honeywell Marine M13294 (M13294-01) Rev.C3 LIDEC PCB 2W – the two-wire electronic board of the Honeywell / Enraf Marine LIDEC level switch used in Water Ingress Detection Systems on bulk carriers and in pump room alarm systems on tankers. The resin-potted round board has plug-in terminal blocks and adjustment potentiometers, and is used singly in sub-assembly M13876-01 or in pairs in M13878-01. It works in the LIDEC system together with the stainless steel probe P/N 32269. Supplied as a replacement spare by SM MARINE SERVICE™, worldwide marine automation and tank gauging spare parts supplier.

Related Honeywell Enraf Tank Gauging & Level Sensors – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need a Honeywell M13294 LIDEC PCB or other LIDEC spares? Send us your board label and vessel details today for a quick quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:46 PM
Need Help? Chat with us