WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

Azbil (Yamatake) SDC25 C25 Single Loop Digital Indicating Controller – Brand New in Box

Item Code:

SDC25 / C25

Brand:

AZBIL (YAMATAKE)

Condition:

New product


Azbil (Yamatake) SDC25 Single Loop Digital Indicating Controller – Model C25, Brand New in Box

Product Information

Manufacturer Azbil Corporation (formerly Yamatake), Japan
Product SDC25 Single Loop Controller (basic model No. C25)
Type Digital indicating PID temperature / process controller, 48 × 96 mm panel mounting
Front panel PV and SP/OUT 4-digit displays; LEDs man, ev1, ev2, ev3, ot1, ot2; keys mode, display, para, enter, arrows; loader port
Full model code (e.g. C25T…) Not clearly visible in the supplied photograph
Code printed on box 81446904-003-01, 81446904-003-03 (meaning not verified)
Quantity shown 5 units, each in original Azbil box with instruction manual
Condition Brand New
Supplier SM MARINE SERVICE™

Product Introduction

The Azbil SDC25 (model C25) is a compact single loop digital indicating controller from Azbil Corporation (formerly Yamatake) of Japan. It is widely used on ships and in industry to control temperature and process values for heaters, boilers, fuel oil and tank heating systems. SM MARINE SERVICE™ supplies brand-new, boxed SDC25 controllers through https://www.smmarineservice.com/.

What Is This Equipment?

The SDC25 reads a process value (PV) from a thermocouple, RTD or DC signal, compares it with the set point (SP) and drives a relay, voltage-pulse (SSR) or current output with PID control. Azbil's "RationaLOOP" PID and "Just-FiTTER" algorithms give stable control with less overshoot. The SDC26 is the same controller in a 96 × 96 mm case. Azbil has announced the end of order acceptance for C25/C26 (September 2026), with C2A / C2B as the successor models – so new SDC25 units are valuable for direct replacement without panel or wiring changes.

Main Features

  • Genuine Azbil SDC25 – brand new in original box with manual
  • Multi-range universal input: thermocouple, RTD, DC voltage / current
  • PID control with auto-tuning (RationaLOOP / Just-FiTTER)
  • Two control outputs and up to three event outputs (model dependent)
  • Optional CT inputs, digital inputs and RS-485 communication
  • Bright dual 4-digit display, 48 × 96 mm (1/8 DIN) panel size
  • Smart loader port for PC configuration (SLP-C35)

Azbil Yamatake SDC25 C25 digital indicating PID temperature controller brand new in box - SM MARINE SERVICE
Azbil SDC25 (C25) digital indicating controller – brand new in original box – SM MARINE SERVICE™

Main Technical Specifications

Basic model C25 (48 × 96 mm); C26 = 96 × 96 mm
Model code structure C25 T + control output (R0 relay, V0 / VC / VV voltage pulse, C0 / CC current) + U (universal input) + A (100–240 V AC) or D (24 V AC/DC) + options, e.g. C25TR0UA1000
Power supply 100–240 V AC 50/60 Hz (AC model) or 24 V AC / 24 V DC (DC model)
Accuracy / sampling ±0.3 % FS, 300 ms sampling cycle (Azbil data)
Relay output rating NO side 250 V AC / 30 V DC, 3 A resistive (relay models)
Ambient 0 to 50 °C, 10–90 % RH non-condensing
Power consumption Max. 12 VA (AC model)
Exact options of these units Not clearly visible in the supplied photograph – please ask for the label

Inside the Unit: PCBs, Modules & Part Numbers

The SDC25 is a sealed controller; internal PCB numbers are not published and are not verified. The model code defines the fitted output and option boards.

Control Output Board – R0 / V0 / VC / VV / C0 / CC

Relay contact, voltage pulse (SSR drive) or 4–20 mA current output, selected by model code.

Input Board – Universal PV Input (U)

Thermocouple, RTD and DC voltage / current input.

Power Supply Board – A (100–240 V AC) / D (24 V AC/DC)

Power supply section selected by model code.

Option Board – Event Relays, CT Inputs, DI, RS-485, Auxiliary Output

Option code 1 = 3 event relay outputs; other codes add auxiliary current output, CT inputs, digital inputs or RS-485 communication.

Related Azbil Models & Documents

SDC26 (C26), SDC15 (C15), SDC35 / SDC36 (C35 / C36), successor C2A / C2B. Manuals CP-SP-1149E (installation & configuration), CP-SS-1819E (specification), CP-SP-1217E (quick reference).

Main Components & Related Units

  • Thermocouple or RTD temperature sensor
  • SSR or contactor driven by the control output
  • Current transformers for heater-break alarm (option)
  • Smart Loader Package SLP-C35 and loader cable

Marine & Industrial Applications

  • Fuel oil and lube oil heater temperature control
  • Boiler, hot-water and steam system control panels
  • Tank heating, galley and HVAC equipment
  • Industrial furnaces, ovens and process plants

Five brand new Azbil SDC25 temperature controllers in original boxes - SM MARINE SERVICE
Five brand-new Azbil SDC25 controllers in original Azbil boxes

Common Problems & Troubleshooting

  • Display shows input error: check sensor type setting and sensor wiring (broken thermocouple / RTD).
  • Temperature overshoots: run auto-tuning (AT) or adjust PID parameters.
  • No output: check RUN/READY and AUTO/MANUAL mode and the output wiring / SSR.
  • Replacing an old unit: match the full model code (output type, power supply, options) and copy the parameters.
  • Safety: isolate power before wiring; relay outputs may carry mains voltage.

Maintenance Tips

  • Clean the front with a soft dry cloth only – no solvents.
  • Check terminal screws and sensor connections at planned maintenance.
  • Keep a record of all parameter settings for quick replacement.
  • Keep new spares in their original box until use.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies brand-new Azbil SDC25 controllers. For a quotation please send the full model code from the side label of your old unit (for example C25TR0UA1000), the quantity and the vessel or plant name.

Worldwide Supply & Shipping

We supply marine and industrial control spares to ship owners, managers, repair yards and plants across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Rotterdam, Hamburg, Piraeus, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta), the Americas (Houston, Panama, Santos, Buenos Aires, Callao) and Africa. Parts are shipped by courier to the vessel's agent or to our customer's office.

Why This Equipment Is Still Used

The SDC25 is fitted in thousands of control panels. Because the C25/C26 is reaching end of order, a new SDC25 lets owners replace a failed controller directly – same panel cut-out, same wiring and same settings – instead of redesigning the panel for a new model.

FAQ

What is the Azbil SDC25?
A single loop digital indicating PID controller, basic model C25, made by Azbil (Yamatake), Japan.

What is the difference between SDC25 and SDC26?
SDC25 (C25) is 48 × 96 mm; SDC26 (C26) is 96 × 96 mm.

Is the SDC25 discontinued?
Azbil lists end of order acceptance for C25/C26 in September 2026, with C2A / C2B as alternative models.

What does R0, V0 or C0 in the model code mean?
R0 = relay output, V0 = voltage pulse output, C0 = current output.

What power supply does it need?
100–240 V AC (model code A) or 24 V AC/DC (model code D).

Which sensors can be connected?
Thermocouples, RTDs and DC voltage / current signals (universal input).

What is the full model code of these units?
Please ask us – we will send the side-label details.

Are these controllers new?
Yes, brand new in original Azbil boxes with manuals.

Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide.

Short Product Description

Brand-new Azbil (Yamatake) SDC25 single loop digital indicating controller, basic model C25, supplied in original Azbil boxes with manuals. The 48 × 96 mm PID controller accepts thermocouple, RTD and DC inputs, has dual 4-digit displays, two control outputs and event outputs, and uses Azbil's RationaLOOP / Just-FiTTER control for stable temperature control. It is widely used for fuel oil heaters, boilers, tank heating and industrial furnaces. With C25/C26 reaching end of order, new SDC25 units allow direct replacement without panel changes. Supplied by SM MARINE SERVICE™, worldwide marine and industrial spare parts supplier.

Related Temperature Controllers & Marine Process Control – In Stock at SM MARINE SERVICE™

Related Controllers – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need brand-new Azbil SDC25 controllers? Send us your model code and quantity today for a quick quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:46 PM
Need Help? Chat with us