NFL-100 / No. S4701
Nabtesco (NABCO)
New product
| Manufacturer | Nabtesco Corporation, Japan (formerly NABCO) |
| Type | NFL-100 (printed on the dial) |
| No. | S4701 (printed on the dial) |
| Scale | AHEAD 0–150 / ASTERN 0–150 min⁻¹ (rpm), centre-zero |
| Dial symbols | Moving-coil instrument symbol and vertical mounting symbol (⊥) |
| Rear terminals | + and − (signal input), two EL terminals (dial illumination) |
| Rear adjuster | Volume (span) adjuster with Japanese instruction plate |
| Case | Black square bezel, 4 fixing screws |
| Condition | New product |
| Category | Accessories |
The Nabtesco NFL-100 is an analogue main engine RPM indicator showing propeller / engine revolutions ahead and astern from 0 to 150 min⁻¹. SM MARINE SERVICE™ supplies this indicator new for bridges, bridge wings and engine control rooms worldwide. More Nabtesco and NABCO engine control spares are listed at https://www.smmarineservice.com/.
On ships with a slow-speed main engine the officers must always see how fast the engine turns and in which direction. This meter receives a DC signal from the RPM detection / remote control system (for example the Nabtesco M-800 series) and moves its needle to the right for AHEAD and to the left for ASTERN. It is usually fitted in the bridge console, on the bridge wings and in the engine control room console.

Nabtesco NFL-100 RPM indicator, No. S4701 – AHEAD / ASTERN 0–150 min⁻¹
| Type | NFL-100 |
| Range | 150 – 0 – 150 min⁻¹ (rpm), ahead / astern |
| Input signal | DC, centre-zero (exact voltage / current Not verified – check your system drawing) |
| Illumination | Via EL terminals (voltage Not verified) |
| Mounting | Panel mounting, vertical (⊥ symbol on dial) |
| Adjustment | Rear span adjuster (Volume) |
The analogue measuring movement that drives the pointer. No PCB number is visible.
The rear plate (Japanese) says: adjust by turning left or right with a screwdriver only when setting the dial scale; do not touch it otherwise.
Two EL terminals feed the dial lighting, normally connected to the console dimmer.
The RPM signal from the engine control system. Polarity gives ahead or astern direction.
The meter works together with the main engine RPM pick-ups and the Nabtesco / NABCO main engine remote control system (M-800-II / M-800-III), the engine order telegraph, the governor system (MG-800 with EAR actuator) and other RPM indicators on the bridge wings and in the engine control room.

Back of the NFL-100: + / − signal terminals, EL illumination terminals and span adjuster
Safety note: switch to a reference indicator before replacing a bridge RPM meter. Do not turn the span adjuster unless you are calibrating.
SM MARINE SERVICE™ supplies the Nabtesco NFL-100 RPM indicator new, and other Nabtesco / NABCO engine control spares. For a quotation, send the type and scale of your meter (e.g. 150-0-150 min⁻¹), a photo of the dial and back, and your delivery port. Other scales can be checked on request.
We ship Nabtesco spares to ships and ship managers in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier to African and Oceania ports too.
Thousands of Japanese-built ships use Nabtesco main engine remote control systems. An exact replacement meter keeps the bridge console original and avoids rewiring or new approvals.
Q: What is the Nabtesco NFL-100?
A: An analogue main engine RPM indicator with ahead / astern scale.
Q: What is the scale?
A: 150 – 0 – 150 min⁻¹ (rpm), astern in red and ahead in black.
Q: What does No. S4701 mean?
A: It is printed on the dial; it is the meter number (meaning Not verified).
Q: Is Nabtesco the same as NABCO?
A: Yes – NABCO merged into Nabtesco in 2003.
Q: What are the EL terminals?
A: The dial illumination supply.
Q: What input signal does it need?
A: A DC centre-zero signal from the RPM system; exact value Not verified – please check your drawing.
Q: Which systems use it?
A: Nabtesco / NABCO M-800 series main engine remote control systems.
Q: Can you supply other ranges?
A: Yes, we can check other scales – send us your meter details.
Q: Is it new?
A: Yes, this indicator is new.
Q: What do you need for a quotation?
A: Type, scale, dial and back photos and your delivery port.
New Nabtesco NFL-100 RPM indicator, No. S4701, with ahead / astern scale 150 – 0 – 150 min⁻¹. This analogue moving-coil meter shows main engine and propeller shaft speed and direction on the bridge, bridge wings or engine control room of ships with Nabtesco / NABCO main engine remote control (M-800 series). The back has + / − signal terminals, EL illumination terminals and a span adjuster for calibration. Genuine Nabtesco, Japan. SM MARINE SERVICE™ ships worldwide – send your meter type and scale for a fast quotation.
SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
Send us your board part number, a clear photo of the PCB and your vessel or delivery port – we will reply quickly with a quotation.
Marine Equipment Supplier