WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image Product Image Product Image Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image

Nakakita NST-732 Pneumatic Temperature Controller 0–100 / 0–150 / 0–200 °C – Marine Jacket Cooling & F.O. Tank Controller (Refurbished)

Item Code:

NST-732 / NS-T 732

Brand:

Nakakita

Condition:

Refurbished


Nakakita NST-732 Pneumatic Temperature Controller 0–100 / 0–150 / 0–200 °C – Marine Jacket Cooling & F.O. Tank Controller (Refurbished)

Manufacturer Nakakita Seisakusho Co., Ltd., Japan
Model NS-T 732 (NST-732) controller – nameplate photo
Temperature ranges available 0–100 °C, 0–150 °C, 0–200 °C
Air supply pressure 1.4 kgf/cm² (nameplate)
Control (output) pressure 0.2–1.0 kgf/cm² (nameplate)
Serial number (one unit) BRR9326B, date 2002.3.25 (nameplate)
Applications on plates Temp. controller for Jacket Cooling F.W.; Temp. controller for F.O. Service Tank
Also shown Nakakita Automatic Controller type F-M40K, 0–150 °C, AC100V 50/60 Hz
Condition Refurbished
Category Accessories

Product Introduction

The Nakakita NST-732 is a field-mounted pneumatic temperature indicating controller used on board ships for jacket cooling water, fuel oil tank and heater temperature control. SM MARINE SERVICE™ supplies refurbished NST-732 controllers in 0–100 °C, 0–150 °C and 0–200 °C ranges to ships and ship managers worldwide. More Nakakita controllers, positioners and valves are listed at https://www.smmarineservice.com/.

What Is This Equipment?

A capillary bulb senses the process temperature. The controller compares it with the set point (red pointer, SET knob) and sends a 0.2–1.0 kgf/cm² air signal to a pneumatic control valve – for example the 3-way valve on the jacket cooling fresh water line or the steam valve of a fuel oil tank heater. The black pointer shows the actual temperature, and the small gauge shows supply and output air pressure.

Main Features

  • Direct-reading dial with set (red) and measured (black) pointers
  • Proportional band dial with Direct / Reverse action change
  • Reset time and rate time dials (PID-type pneumatic control)
  • Pilot relay with orifice cleaning push button
  • Built-in supply / control air pressure gauge (kgf/cm²)
  • Capillary tube with armoured protection and sensing bulb
  • Weather-proof case with hinged window cover

nakakita nst-732 temperature controller jacket cooling fw fo service tank

Nakakita NST-732 temperature controllers – jacket cooling F.W. and F.O. service tank – refurbished, SM MARINE SERVICE™ stock

Main Technical Specifications

Type Pneumatic temperature indicating controller
Ranges 0–100 °C / 0–150 °C / 0–200 °C
Air supply 1.4 kgf/cm²
Output signal 0.2–1.0 kgf/cm²
Control action Proportional + reset + rate, direct or reverse
Sensor Capillary tube with bulb
Electric version shown F-M40K automatic controller, AC100V 50/60 Hz, 0–150 °C

Inside the Unit: PCBs, Modules & Part Numbers

The NST-732 is a mechanical/pneumatic instrument (no PCB). Its main internal parts and the model codes found for this family are:

Measuring element (Bourdon / bellows with capillary bulb)

Converts bulb temperature into pointer movement.

Setting mechanism with SET knob

Sets the red set-point pointer.

Proportional band, reset time and rate time dials

Tune the control response; the proportional band dial also changes Direct/Reverse action.

Pilot relay with orifice cleaning push button

Amplifies the nozzle-flapper signal to the 0.2–1.0 kgf/cm² output.

Supply / control pressure gauge

Shows air supply and output pressure.

Model variants

NST-732, NS-T 732, NS-TM-732 and NS-TBT-732 are names used for this controller family; NS-VBT-732 is listed as a related viscosity version. Electric automatic controller F-M40K is also shown.

Main Components & Related Units

A complete loop includes the NST-732 controller, an air filter regulator (1.4 kgf/cm² supply), a pneumatic control valve or 3-way valve, often a valve positioner such as the Nakakita NS737S-D, and the sensing bulb fitted in the pipe or tank.

nakakita nst-732 temperature controller 0-200c proportional band reset rate dials

Inside the Nakakita NST-732 (0–200 °C): proportional band, reset time and rate time dials, pilot relay with orifice cleaning button

Marine & Industrial Applications

  • Main engine jacket cooling fresh water temperature control
  • Fuel oil service and settling tank heating control
  • Fuel oil heater and lube oil cooler temperature control
  • Boiler, hot water and tank cleaning heater systems

nakakita nst-732 pneumatic temperature controller 0-150c inside view

NST-732 0–150 °C – setting mechanism and control dials

Common Problems & Troubleshooting

  • Temperature hunting – reset time too short or proportional band too narrow; adjust as shown on the cover plate.
  • Offset from set point under load change – proportional band too wide or reset dial too long.
  • No output pressure – check air supply (1.4 kgf/cm²) and press the orifice cleaning button.
  • Wrong reading – damaged capillary or bulb; the measuring system then needs calibration or replacement.

Safety note: change the valve to manual or local control before working on the controller, and never bend or cut the capillary tube.

Maintenance Tips

  • Keep instrument air clean and dry – dirty air blocks the orifice.
  • Check calibration against a reference thermometer during dry-dock or routine maintenance.
  • Protect the capillary tube from sharp bends and vibration.

nakakita f-m40k automatic temperature controller 0-150c ac100v

Nakakita F-M40K automatic controllers, 0–150 °C, AC100V – also available

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies refurbished Nakakita NST-732 controllers in 0–100 °C, 0–150 °C and 0–200 °C ranges, and F-M40K automatic controllers. For a quotation, send the nameplate photo (model, range, capillary length), the application (jacket cooling, F.O. tank, heater) and your delivery port.

nakakita nst-732 controller nameplate air supply 1.4 kgf control pressure 0.2-1.0

Nameplate: NS-T 732, 0–150 °C, air supply 1.4 kgf/cm², control pressure 0.2–1.0 kgf/cm²

Worldwide Supply & Shipping

We ship Nakakita controllers to ships and ship managers in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier to African and Oceania ports too.

Why This Equipment Is Still Used

Pneumatic controllers like the NST-732 are simple, reliable and safe in the engine room, and many Japanese-built ships still use them. A refurbished unit is the quickest like-for-like replacement without changing valves or piping.

FAQ

Q: What is the Nakakita NST-732?
A: A pneumatic temperature indicating controller that sends a 0.2–1.0 kgf/cm² signal to a control valve.

Q: Which ranges do you have?
A: 0–100 °C, 0–150 °C and 0–200 °C.

Q: What air supply does it need?
A: 1.4 kgf/cm², as written on the nameplate.

Q: Is NS-TM-732 or NS-TBT-732 the same?
A: These are names used for the same Nakakita 732 controller family; please send your nameplate to confirm the exact version.

Q: Can it be used for jacket cooling water?
A: Yes – one of the units shown is labelled for jacket cooling F.W.

Q: Can it be used for a fuel oil tank?
A: Yes – one unit is labelled for the F.O. service tank.

Q: Does it have a PCB?
A: No, the NST-732 is fully pneumatic. The F-M40K shown is an electric (AC100V) automatic controller.

Q: Is the unit new?
A: These units are refurbished.

Q: What do you need for a quotation?
A: Nameplate photo, range, capillary length, application and delivery port.

Short Product Description

Refurbished Nakakita NST-732 (NS-T 732) pneumatic temperature controllers from Nakakita Seisakusho, Japan, in 0–100 °C, 0–150 °C and 0–200 °C ranges. Air supply 1.4 kgf/cm², output 0.2–1.0 kgf/cm², with proportional band, reset and rate dials, direct/reverse action and capillary bulb sensor. Used for main engine jacket cooling water, fuel oil service tank and heater temperature control on ships. Nakakita F-M40K AC100V automatic controllers (0–150 °C) are also available. SM MARINE SERVICE™ ships worldwide – send your nameplate photo for a quick quotation.

Related Nakakita Marine Controllers & Valves – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Send us your controller nameplate photo, temperature range and your vessel or delivery port – we will reply quickly with a quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 10:50 PM
Need Help? Chat with us