WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

Nakakita NS737S-D Pneumatic Valve Positioner

Item Code:

NS737S-D

Brand:

NAKAKITA

Condition:

Refurbished


Nakakita NS737S-D Pneumatic Valve Positioner – Nakakita Seisakusho, Japan

Product Information

Product Name Pneumatic Valve Positioner
Manufacturer Nakakita Seisakusho Co., Ltd. (Japan)
Brand NAKAKITA
Type / Model NS737S-D
Input Signal 0.2 – 1.0 bar (pneumatic)
Supply Pressure 1.4 bar
Output Pressure 0.2 – (upper value not clearly visible in the supplied photograph) bar
Pressure Gauges 3 gauges, 0–200 kPa scale
Marking on Nameplate B1233 (meaning not verified)
Serial Number Not clearly visible in the supplied photograph
Country of Manufacture Not clearly visible in the supplied photograph (manufacturer is based in Japan)
Condition Refurbished (used)
Supplier SM MARINE SERVICE™, Chattogram, Bangladesh

Product Introduction

The Nakakita NS737S-D is a pneumatic valve positioner made by Nakakita Seisakusho Co., Ltd., a well-known Japanese maker of marine control valves and automatic controllers. It is fitted on pneumatically operated control valves on board ships – for example steam pressure reducing valves, level control valves and other process control valves in the engine room and boiler system. SM MARINE SERVICE™ supplies this positioner in refurbished condition, together with other Nakakita spare parts, to ship owners, ship managers and marine repair workshops worldwide. Visit us at https://www.smmarineservice.com/.

What Is This Equipment?

A valve positioner makes sure a control valve opens exactly as much as the controller asks. The controller sends a pneumatic signal of 0.2–1.0 bar (20–100 kPa) to the NS737S-D. The positioner compares this signal with the actual valve stem position (through its feedback linkage) and sends the right amount of air from the 1.4 bar supply to the valve actuator. This gives accurate, stable valve positioning even when the valve has friction or changing process pressure. The NS737S-D is a fully pneumatic instrument – it works with air only and does not need electrical power.

Main Features

  • Genuine Nakakita Seisakusho positioner, type NS737S-D
  • Standard pneumatic input signal 0.2–1.0 bar
  • Supply pressure 1.4 bar
  • Three built-in pressure gauges (0–200 kPa) for supply, signal and output monitoring
  • Robust cast aluminium housing with bolted cover and mounting bracket
  • No electronics – simple, reliable pneumatic operation suitable for the marine environment
  • Direct replacement for existing NS737S-D positioners on Nakakita control valves

Nakakita NS737S-D pneumatic valve positioner with three pressure gauges - SM MARINE SERVICE
Nakakita NS737S-D pneumatic valve positioner (refurbished) – SM MARINE SERVICE™

Main Technical Specifications

Type NS737S-D
Operating principle Pneumatic (air signal in, air output to actuator)
Input signal 0.2 – 1.0 bar
Supply pressure 1.4 bar
Output pressure From 0.2 bar; upper value not clearly visible in the supplied photograph
Gauges 3 × 0–200 kPa
Housing Cast aluminium with NAKAKITA logo cover
Power supply Not required (pneumatic)
US NSN reference NSN 4820-01-420-2514 (valve positioner, NS 737S-D)

Inside the Unit: PCBs, Modules & Part Numbers

The NS737S-D is a pure pneumatic positioner, so there are no PCBs, circuit boards or electronic modules inside. Its parts are mechanical and pneumatic. The part numbers and references below were found in public parts databases and supplier listings:

NS737S-D – Valve Positioner (complete unit)

Listed under NATO Stock Number NSN 4820-01-420-2514 (item name: Positioner, Valve), part alternates NS 737S-D / NS737SD. Nakakita Seisakusho CAGE code: S8169.

NS737S-D-2 / KC004484 No. 2 – Positioner Loading Unit

Listed under NSN 4820-01-420-3771 with part alternates NS 737S-D-2 and KC004484 NO. 2, identified as a positioner loading unit for the Nakakita NS737S-D valve positioner.

NS737S-D Repair Kit (Pilot Valve, Diaphragm, O-rings, Seals)

Repair kits for the NS737S-D pilot valve, diaphragm, O-rings and seals are offered in the market. Individual kit part numbers: Not verified.

Pressure Gauges (0–200 kPa)

Three small gauges mounted on top of the positioner show supply, signal and output pressure. Gauge part number: Not clearly visible in the supplied photograph.

Feedback Lever / Linkage

Connects the positioner to the valve stem so the positioner can sense the actual valve position. Part number: Not verified.

Nakakita NS737S-D positioner nameplate close-up showing input signal and supply pressure
Nameplate close-up: TYPE NS737S-D, input signal 0.2–1.0 bar, supply 1.4 bar, Nakakita Seisakusho

Main Components & Related Units

  • Nakakita pneumatic control valves (e.g. steam pressure reducing valves, level control valves) on which the NS737S-D is mounted
  • Nakakita NSPS 732 pressure controller (automatic controller)
  • Nakakita NSTM732 temperature controller (automatic controller)
  • Nakakita NS953A gauge saver (level gauge equipment)
  • Air filter regulator for the 1.4 bar supply (model depends on installation – not verified)

Marine & Industrial Applications

  • Boiler steam pressure reducing valves
  • Level control valves (boiler water, cascade tank, drain tanks)
  • Pressure and temperature control valves in the engine room
  • Fuel oil, lube oil and cooling water control loops using Nakakita controllers
  • Industrial process plants using pneumatic control valves

Common Problems & Troubleshooting

  • Valve does not move: check the 1.4 bar supply on the supply gauge, check the input signal on the signal gauge, and check for blocked air passages or a stuck pilot valve.
  • Valve hunting / unstable: check the feedback linkage for looseness, check the actuator for air leaks, and check that the supply pressure is stable.
  • Wrong valve position: zero and span adjustment may be needed; also check the feedback lever setting.
  • Air leakage / constant bleeding: worn diaphragm, O-rings or seals – replace with a repair kit.
  • Gauge reading wrong: damaged or worn gauge – replace the gauge.

Safety note: before working on the positioner, put the control loop into manual, isolate the air supply, release all pressure and make sure the valve and process side (steam, hot water, oil) are safe. Follow the ship's permit-to-work procedure.

Maintenance Tips

  • Use clean, dry instrument air – water and oil are the main cause of positioner failure.
  • Drain the air filter regulator regularly.
  • Check the feedback linkage and mounting bolts for tightness.
  • Check the gauges and the valve stroke during routine maintenance.
  • Replace diaphragms, O-rings and seals at overhaul.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies the Nakakita NS737S-D positioner and other Nakakita control valve and controller spare parts. For a quick quotation please send: a clear photo of the nameplate, the type (NS737S-D), the vessel name / IMO number (if possible), the valve application, the required quantity and the delivery port. We ship worldwide.

Why This Equipment Is Still Used

Many ships built in Japan, Korea and China have Nakakita control valves in their boiler and engine room systems. The pneumatic NS737S-D positioner is simple, robust and has no electronics, so it continues to work for many years. Replacing the whole control valve is expensive, so ship owners prefer an exact replacement positioner to keep the original system running.

FAQ

What is the Nakakita NS737S-D?
It is a pneumatic valve positioner made by Nakakita Seisakusho, used on control valves on ships.

What is the input signal of the NS737S-D?
0.2 – 1.0 bar, as shown on the nameplate.

What supply pressure does it need?
1.4 bar, according to the nameplate.

Does the NS737S-D have any PCB inside?
No. It is a pneumatic positioner with no PCB or electronic module.

What is NSN 4820-01-420-2514?
It is the NATO Stock Number listed for the Nakakita NS 737S-D valve positioner.

What is NS737S-D-2 / KC004484?
These part numbers are listed under NSN 4820-01-420-3771 as a positioner loading unit for the NS737S-D.

Is a repair kit available?
Yes, pilot valve / diaphragm / O-ring repair kits for the NS737S-D exist in the market. Ask us for a quotation.

What valves use this positioner?
Nakakita pneumatic control valves such as steam reducing valves and level control valves.

Which condition do you supply?
This unit is refurbished. Other conditions may be available – please ask.

Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide from Bangladesh and China.

Short Product Description

The Nakakita NS737S-D is a pneumatic valve positioner from Nakakita Seisakusho Co., Ltd., Japan, used on marine control valves such as boiler steam reducing valves and level control valves. It takes a 0.2–1.0 bar pneumatic signal and, using a 1.4 bar air supply, positions the valve actuator accurately according to the controller demand. Three 0–200 kPa gauges allow easy checking of supply, signal and output pressure. The unit is fully pneumatic with no electronics, making it reliable in engine room conditions. SM MARINE SERVICE™ supplies this refurbished NS737S-D as a direct replacement for ships worldwide.


SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need a Nakakita NS737S-D positioner or other Nakakita spare parts? Send us your enquiry today for a fast quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:50 AM
Need Help? Chat with us