WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Samgong-Mitsubishi Selfjector SJ-G Purifier Control SG-G-Terminal Board 0120-30G & 0010-30G (Brand New)

Item Code:

SG-G-TERMINAL 0120-30G / 0010-30G

Brand:

Samgong / KT Electric

Condition:

New product


Samgong-Mitsubishi Selfjector SJ-G Purifier Control SG-G-Terminal Board 0120-30G & 0010-30G (Brand New)

Board name (printed) SG-G-TERMINAL BOARD
Board numbers (printed) 0120-30G & 0010-30G
Label on board EL31-04 (barcode label)
Application Terminal and relay output board of the purifier automatic control panel – same SG-G board series as the SG-G-CPU & Display Board 0010-10G used with Samgong-Mitsubishi SELFJECTOR SJ-G purifiers
Manufacturer Not printed on the board – Samgong / KT Electric Co., Ltd. (Korea) style part numbering; Not verified
Condition Brand new
Category Accessories – marine PCB / spare parts

Product Introduction

The SG-G-Terminal Board 0120-30G & 0010-30G is the field wiring terminal and relay output board of an automatic oil purifier control panel. It belongs to the same SG-G board series as the SG-G-CPU & Display Board 0010-10G, used with Samgong-Mitsubishi SELFJECTOR SJ-G series purifiers. SM MARINE SERVICE™ supplies this board brand new to ships and repair workshops worldwide – see more purifier control spares at https://www.smmarineservice.com/.

What Is This Equipment?

In the purifier control panel, the CPU board makes the decisions and this terminal board connects them to the outside world. Ribbon cables from the CPU board plug into CN1 and CN2. The relays on this board switch the purifier solenoid valves, alarm outputs and run signals, and the green plug-in terminal blocks take the field cables from valves, sensors, the motor starter and the alarm system.

Main Features

  • Six relay outputs (RY1–RY6 area) with status LEDs LD2–LD6 and LDF
  • Surge protection: varistors TNR1–TNR6, RC snubber capacitors C1–C7 and diodes D1–D6
  • Two ribbon cable connectors CN1 and CN2 to the CPU board
  • Pluggable green screw terminal blocks with printed terminal names (WA, WB, WC, WD, T1–T3, V1, S1, S6, M4–M9, W3–W8, A1–A3, R2, R3 and numbered terminals 1 to 71)
  • Brand new, ready for installation

samgong mitsubishi selfjector sj-g purifier control sg-g-terminal board 0120-30g 0010-30g relay board

SG-G-Terminal Board 0120-30G & 0010-30G – brand new, SM MARINE SERVICE™ stock

Main Technical Specifications

Board type Terminal / relay output board
Relays 6 PCB relays (Panasonic type)
Connectors CN1 and CN2 flat cable headers; pluggable screw terminals
Protection Varistors TNR1–TNR6, snubber capacitors, diodes
Board numbers 0120-30G & 0010-30G
Coil / contact rating Not clearly visible in the supplied photograph

Inside the Unit: PCBs, Modules & Part Numbers

This terminal board works together with other boards of the purifier control system:

SG-G-Terminal Board 0120-30G & 0010-30G

This board – field wiring terminals and relay outputs for solenoid valves and alarms.

SG-G-CPU & Display Board 0010-10G

Processor, 7-segment display, keys and alarm LEDs (LEAK, NO-D, HIDE, VIB, SV1–SV9) of the same panel; connects to this board by ribbon cable.

GBC-1 / GBC-2 / GSH-1 Automatic Control Panels

SELFJECTOR SJ-G automatic control panel types (total discharge, and HIDENS with partial discharge).

MM-3 / MM32 Multi-Monitor

Monitors flow, temperature, pressure and speed and sends leakage and no-discharge signals.

KT Electric 9410-10FA-1 CPU Board and 9410-20FA-1 Display Board

Boards of the earlier KT Electric purifier controller.

KT-PFC / KT-PFC-A I/O Module (0120-10A main)

I/O module of the Samgong purifier auto control system.

Exact panel model compatibility is Not verified – please compare the board numbers 0120-30G / 0010-30G with your unit.

Main Components & Related Units

The purifier system includes the SELFJECTOR SJ-G purifier (e.g. SJ10G, SJ20G, SJ30G), the motor starter, the automatic control panel with CPU and terminal boards, the Multi-Monitor, the feed, sealing and operating water solenoid valves, and the alarm panel.

Marine & Industrial Applications

  • Fuel oil and lube oil purifier control panels in the engine room
  • Solenoid valve and alarm output switching for automatic sludge discharge
  • Replacement or onboard spare for SG-G series purifier control panels

samgong mitsubishi selfjector sj-g purifier control sg-g-terminal board 0120-30g 0010-30g relay board terminals

Relay outputs and pluggable field terminals of the SG-G-Terminal Board

Common Problems & Troubleshooting

  • Solenoid valve does not operate – check the relay, its LED, the terminal screw and the valve coil.
  • Relay chatter or burnt contact – a shorted valve coil or failed snubber can damage relays; check the load first.
  • No signal from CPU board – check the ribbon cables at CN1 / CN2.
  • Loose terminal plugs – vibration can loosen the green plug-in terminals; push them fully home and tighten the screws.

Safety note: stop the purifier and switch off the control panel before working on the board. Output terminals may carry mains voltage.

Maintenance Tips

  • Mark every wire before unplugging the terminal blocks.
  • Check terminal screws for tightness during routine engine room inspections.
  • Keep the panel free from oil mist and moisture.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ has this terminal board brand new, and the matching SG-G-CPU & Display Board 0010-10G. For a quotation, send the board numbers, a photo of your old board, the purifier and control panel model, and your delivery port.

Worldwide Supply & Shipping

We ship purifier control boards to ships and ship managers in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier to African and Oceania ports too.

Why This Equipment Is Still Used

Samgong-Mitsubishi SELFJECTOR purifiers are installed on many Korean- and Japanese-built ships. A new terminal board fixes failed relay outputs quickly without replacing the complete control panel.

FAQ

Q: What is the SG-G-Terminal Board 0120-30G & 0010-30G?
A: It is the field wiring terminal and relay output board of an automatic oil purifier control panel.

Q: Which board does it work with?
A: It belongs to the same SG-G series as the SG-G-CPU & Display Board 0010-10G and connects to it by ribbon cables.

Q: Which purifier uses it?
A: The SG-G series matches Samgong-Mitsubishi SELFJECTOR SJ-G purifier control systems. Please confirm with your board numbers.

Q: Is the board new?
A: Yes, brand new.

Q: What does EL31-04 mean?
A: It is the barcode label on the board; please compare it with your board.

Q: How many relays does it have?
A: Six PCB relays for solenoid valve and alarm outputs.

Q: Do you also have the CPU board?
A: Yes – the SG-G-CPU & Display Board 0010-10G is in stock, brand new.

Q: What do you need for a quotation?
A: Board numbers, photo, purifier and panel model, and delivery port.

Q: Do you ship worldwide?
A: Yes, by express courier to ports worldwide.

Short Product Description

Brand new SG-G-Terminal Board 0120-30G & 0010-30G for the automatic control panel of Samgong-Mitsubishi SELFJECTOR SJ-G series marine oil purifiers. The board carries six relay outputs with LEDs, varistor and RC surge protection, two ribbon cable connectors (CN1, CN2) to the CPU board and pluggable screw terminals for valves, sensors, starter and alarm wiring. It works with the SG-G-CPU & Display Board 0010-10G. Ideal as a replacement or onboard spare. SM MARINE SERVICE™ ships worldwide – send your board numbers for a quick quotation.

Related Purifier & Separator Control Parts – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Send us your board part number, a clear photo of the PCB and your vessel or delivery port – we will reply quickly with a quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 10:50 PM
Need Help? Chat with us