WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Mitsubishi Kakoki FSC-1S TR Programmable Controller with E-01T-4131 / E-01T-4157 Output & E-31N-4132 Input Modules

Item Code:

FSC-1S TR

Brand:

Mitsubishi Kakoki

Condition:

Refurbished


Mitsubishi Kakoki FSC-1S TR Programmable Controller with E-01T-4131, E-01T-4157 Output and E-31N-4132 Input Modules

Manufacturer Mitsubishi Kakoki – Electronics Industries (as printed on the unit label)
Model FSC-1S TR (label also shows "0413")
Product Type Programmable sequence controller (PLC) with built-in programming keypad and I/O modules
Modules in set E-01T-4131 (Output), E-01T-4157 (Output) × 2, E-31N-4132 (Input)
Serial Number Not clearly visible in the supplied photograph
Other marking Sticker "2013" on the CPU unit
Condition Refurbished

Product Introduction

SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies this refurbished Mitsubishi Kakoki FSC-1S TR controller set. It includes the CPU / programming unit and four plug-in I/O modules. Mitsubishi Kakoki is known in the marine industry for SELFJECTOR oil purifiers and their control equipment.

What Is This Equipment?

The FSC-1S is a compact programmable sequence controller. The CPU unit has a built-in keypad with ladder instructions (AND, OR, STR, NOT, OUT, TMR, CNT, MCS, MCR, SET, RST, SR, SHF), an ADDRESS/DATA display, status lamps (ON/OFF, RUN, BATT, PWR, CPU), a RUN/LOAD switch and a TAPE / PRG port for loading and saving the program. The I/O modules read field signals and switch outputs.

Main Features

  • CPU unit with programming keypad and ADDRESS/DATA display
  • Function keys: F, R, DEL, INS, SHF, SCH (CHECK), ENT, PRV (READ), CLR, NXT (WRITE), MON
  • Status lamps: ON/OFF, RUN, BATT, PWR, CPU
  • RUN / LOAD switch and TAPE / PRG program port
  • Plug-in output and input modules with LED status lamps
  • Screw terminal blocks and multi-pin connectors for field wiring

mitsubishi kakoki fsc-1s tr plc e-01t-4131 e-01t-4157 output e-31n-4132 input module
Mitsubishi Kakoki FSC-1S TR controller with E-01T-4131, E-01T-4157 and E-31N-4132 modules

Main Technical Specifications

CPU / programming unit FSC-1S TR
Output modules E-01T-4131 (1 pc), E-01T-4157 (2 pcs)
Input module E-31N-4132 (1 pc)
Program storage Battery-backed (BATT lamp), TAPE / PRG port
Power supply / I/O voltage ratings Not clearly visible in the supplied photograph

Inside the Unit: PCBs, Modules & Part Numbers

FSC-1S TR – CPU & Programming Unit

Holds the CPU, program memory with battery back-up, display and keypad. Internal board numbers are Not verified.

E-01T-4131 – Output Module

Output card with LED lamps. On this unit the lamps are labelled M-STP, AL-C, ALARM and FEED by the ship's installer. Wired through a multi-pin connector.

E-01T-4157 – Output Module (2 pcs)

Output cards with screw terminal blocks. Lamp labels on these units include HH, LL, SV1–SV4, AUTO and LEAK.

E-31N-4132 – Input Module

Input card with LED lamps and a multi-pin connector. Lamp labels include LM, HH, LL and MOTOR.

Power Supply PCB

Part number Not verified; send us a photo of your unit's label for checking.

Main Components & Related Units

The set works with field sensors and actuators such as level switches (HH/LL), solenoid valves (SV1–SV4), motor contactors, leak and alarm signals. The labels suggest use in a tank or purifier control system; the exact original application is Not verified.

Marine & Industrial Applications

  • Marine auxiliary machinery sequence control
  • Purifier, tank level and valve sequence control
  • Alarm and motor start/stop logic

Common Problems & Troubleshooting

  • BATT lamp on – the backup battery is low; save or record the program before replacing it
  • Program lost after power off – battery or memory fault
  • Output lamp on but field device not working – check output module, fuse and wiring
  • Input lamp not changing – check sensor, wiring and input module

Safety note: isolate power before removing modules. Make sure the running program is saved before any repair.

Maintenance Tips

  • Replace the backup battery regularly
  • Keep connectors and terminals tight and clean
  • Keep a spare I/O module on board for critical systems

Spare Parts & Replacement Availability

For a quotation, send us the model printed on your CPU unit (FSC-1S TR) and the module numbers (for example E-01T-4157 or E-31N-4132), with photos of the labels.

Worldwide Supply & Shipping

We ship marine controllers and I/O modules to ship owners, ship managers and repair yards across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul) and Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta). We also deliver to the Americas (Houston, Panama, Santos, Callao, Buenos Aires) and Africa (Durban, Lagos, Mombasa).

Why This Equipment Is Still Used

Many older ships still run Mitsubishi Kakoki control systems. A direct replacement with the same module numbers avoids rewiring and reprogramming.

FAQ

What is the FSC-1S? A Mitsubishi Kakoki programmable sequence controller with a built-in keypad.

What is E-01T-4131? An output module for the FSC-1S.

What is E-01T-4157? An output module with screw terminals; two are in this set.

What is E-31N-4132? An input module for the FSC-1S.

Can I buy the modules separately? Please ask; availability is confirmed on request.

What does the BATT lamp mean? It indicates the backup battery state.

Is this a Mitsubishi Electric MELSEC PLC? No, the label shows Mitsubishi Kakoki Electronics Industries.

What condition is it? Refurbished.

Do you ship worldwide? Yes, to all major ports.

Short Product Description

Refurbished Mitsubishi Kakoki FSC-1S TR programmable sequence controller set. It includes the CPU / programming unit with keypad, ADDRESS/DATA display, RUN/LOAD switch and TAPE/PRG port, plus E-01T-4131 and two E-01T-4157 output modules and one E-31N-4132 input module. Used for marine auxiliary machinery sequence control such as tank level, solenoid valve, motor and alarm logic. Available from SM MARINE SERVICE™ with worldwide shipping. Send us your module numbers for an exact quotation.

Related Marine PLCs & Purifier Controls – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Contact us today for a fast quotation on Mitsubishi Kakoki FSC-1S controllers and modules.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:46 PM
Need Help? Chat with us