AS V8210CU / V8210EU-00
Yokogawa Navitec
Refurbished
| Manufacturer | Yokogawa Navitec (Yokogawa Denshikiki / YDK), Japan |
| Board name | SSR UNIT (printed on the board) |
| Board marking in photo | V8210 series – suffix letters partly covered by label; board code L 881047 |
| Matching part numbers | AS V8210CU / V8210EU-00 (SSR Unit of the V8210 family) |
| System | Yokogawa PT100 / PT200 series autopilot |
| Relays | 2 × J 8.8.2 relay, type 1H24 D2W 101 (UL) |
| Serial number | Not clearly visible in the supplied photograph |
| Country of manufacture | Japan (printed on the board) |
| Condition | Refurbished |
The Yokogawa Navitec SSR Unit PCB (AS V8210CU / V8210EU-00) is the solid state relay output board of the Yokogawa V8210-series autopilot. SM MARINE SERVICE™ supplies this refurbished board, with its wiring harness, to vessels worldwide. More Yokogawa autopilot spares are listed at https://www.smmarineservice.com/.
The SSR unit switches the steering output of the autopilot. When the servo amplifier orders port or starboard rudder, the two solid state relays on this board switch the power to the steering gear solenoid valves (or the steering control circuit). Snubber capacitors and diodes protect the relays from voltage spikes. If one relay fails, the rudder will move to one side only or not at all in AUTO mode.

Yokogawa Navitec SSR Unit PCB AS V8210CU / V8210EU-00 – refurbished, SM MARINE SERVICE™ stock
| Board type | Solid state relay (SSR) output board |
| Relays | 2 × J 8.8.2, 1H24 D2W 101 |
| Snubber capacitors | 2 × 0.1 µF 400 V (marked .1K400V) |
| Resistors / diodes | R1, R2 / D1–D4 |
| Board code | L 881047 |
| Rated load | Not clearly visible in the supplied photograph |
| Compatible systems | Yokogawa PT100 / PT200 autopilot (V8210 family) – confirm with your board part number |
The SSR unit is one board of the Yokogawa V8210 autopilot family. These are the board numbers found for this system:
Main processor board of the PT100 autopilot; runs the steering control program.
Operator key and display board of the PT100 control panel.
Key and indicator board for the PT200 operating panel.
Second key/display board used in PT200 control stands.
Auto steering processor inside the PB316 auto steering unit.
Auto CPU board version found in V8210-series autopilots.
Input/output board that drives synchro heading repeaters.
Solid state relay board that switches the steering solenoid / motor circuits.
Servo amplifier that compares rudder order with rudder feedback and drives the steering output.
DC power / panel illumination dimmer board of the PT200.
Further boards of the same V8210 family (function to be confirmed with the customer's unit).
The SSR unit receives its drive signal from the AS V8210 Servo Amp PCB and switches the steering gear solenoids. Other units of the PT200 system include the PB316 Auto Steering Unit, PH-710-08 Switch Unit, synchro repeaters and the rudder feedback transmitter.

SSR unit for Yokogawa autopilot – port and starboard steering output relays
Safety note: change to hand steering and switch off autopilot and steering power before working on this board. Solenoid circuits may carry mains voltage.
SM MARINE SERVICE™ supplies the AS V8210CU SSR Unit (V8210EU-00) and the matching AS V8210 Servo Amp PCB. For a quotation, send us the board number, a clear PCB photo, the autopilot model and your delivery port.
We ship Yokogawa autopilot spares to the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier service to African and Oceania ports as well.
Yokogawa PT100 and PT200 autopilots remain in service on many vessels. A refurbished SSR unit is a simple, low-cost repair that brings the autopilot back without replacing the whole steering stand.
Q: What does the Yokogawa SSR unit do?
A: It switches the port and starboard steering output of the autopilot using two solid state relays.
Q: What is the part number of this SSR unit?
A: AS V8210CU, board number V8210EU-00 (please compare with the label on your board).
Q: Which autopilot uses this board?
A: Yokogawa Navitec PT100 / PT200 series autopilots with the V8210 board family.
Q: Which relays are fitted?
A: Two J 8.8.2 relays, type 1H24 D2W 101.
Q: Is the wiring harness included?
A: The board in the photo is supplied with its wiring harness.
Q: Do you supply the servo amp board too?
A: Yes – the Yokogawa AS V8210 Servo Amp PCB is also in stock.
Q: What do you need for a quotation?
A: Board number, PCB photo, autopilot model and delivery port.
Q: Do you ship worldwide?
A: Yes, by express courier to ports and offices worldwide.
Refurbished Yokogawa Navitec SSR Unit PCB, AS V8210CU / V8210EU-00, for PT100 / PT200 ship autopilots. The board uses two J 8.8.2 solid state relays (1H24 D2W 101) with snubber capacitors and protection diodes to switch the port and starboard steering output to the steering gear solenoids. Made in Japan and supplied with wiring harness. Ideal as a replacement or onboard spare. SM MARINE SERVICE™ also supplies the matching AS V8210 Servo Amp PCB and other V8210 boards, with worldwide shipping. Send your board number for a quick quotation.
SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
Send us your board part number, a clear photo of the PCB and your vessel or delivery port – we will reply quickly with a quotation.
Marine Equipment Supplier