WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Yokogawa Navitec AS V8210 Servo Amp PCB – PT100 / PT200 Autopilot Servo Amplifier Board

Item Code:

AS V8210 SERVO AMP

Brand:

Yokogawa Navitec

Condition:

Refurbished


Yokogawa Navitec AS V8210 Servo Amp PCB – PT100 / PT200 Autopilot Servo Amplifier Board

Manufacturer Yokogawa Navitec (Yokogawa Denshikiki / YDK), Japan
Board marking AS V8210 (suffix letters covered by label in the photograph)
Board name SERVO AMP.
System Yokogawa PT100 / PT200 series autopilot (V8210 board family)
Product type Autopilot servo amplifier PCB
Serial number Not clearly visible in the supplied photograph
Country of manufacture Japan (printed on the board)
Condition Refurbished
Category Accessories – marine PCB / spare parts

Product Introduction

The Yokogawa Navitec AS V8210 Servo Amp PCB is the servo amplifier board of the Yokogawa V8210-series autopilot used in PT100 and PT200 steering control systems. SM MARINE SERVICE™ supplies this refurbished board to ships, ship managers and repair yards worldwide. Visit https://www.smmarineservice.com/ for more Yokogawa autopilot spare parts.

What Is This Equipment?

In an autopilot, the servo amplifier is the link between the steering computer and the steering gear. It receives the rudder order signal, compares it with the actual rudder angle from the feedback transmitter, and drives the output circuit (solenoid valves through the SSR unit, or the steering motor) until the rudder reaches the ordered angle. When this board fails, the autopilot can no longer follow the set course reliably and the vessel must change to hand steering.

Main Features

  • Original Yokogawa Navitec board, made in Japan
  • Rudder order / rudder feedback comparison and follow-up control
  • Multi-turn and single-turn trimmer potentiometers (VR1–VR10) for gain, zero and span adjustment
  • TEST terminals and selector switch for setup and fault finding
  • On-board voltage regulators (U1, U2) for stable analogue supply
  • Connectors CN1, CN2, CN3 and CN4 for power, feedback and control wiring

yokogawa navitec as v8210 servo amp pcb pt200 autopilot servo amplifier board

Yokogawa Navitec AS V8210 Servo Amp PCB – refurbished, SM MARINE SERVICE™ stock

Main Technical Specifications

Board type Servo amplifier PCB (analogue control)
Connectors CN1 (5-pin), CN2 (5-pin), CN3 (5-pin), CN4 (13-pin)
Visible ICs FT5715M (2 pcs), Toshiba TC4093BP and other DIP ICs
Adjustment VR1–VR10 trimmers, SPAN adjustment, TEST switch
Supply voltage Not clearly visible in the supplied photograph
Compatible systems Yokogawa PT100 / PT200 autopilot (V8210 family) – confirm with your board part number

Inside the Unit: PCBs, Modules & Part Numbers

The servo amp works together with the other boards of the Yokogawa V8210 autopilot family. These are the board numbers we have found for this system – customers often search with only one of them when a board fails:

AS V8210AA – CPU Board (PT100)

Main processor board of the PT100 autopilot; runs the steering control program.

AS V8210AM / V8210EM-02 – Key Display PCB (PT100)

Operator key and display board of the PT100 control panel.

AS V8210AB / V8210EB-02 – Key Display I PCB (PT200)

Key and indicator board for the PT200 operating panel.

AS V8210AC / V8210EC-01 – AC Key Display II PCB (PT200)

Second key/display board used in PT200 control stands.

AS V8210BA – Auto CPU Board (PB316 Auto Steering Unit, PT200)

Auto steering processor inside the PB316 auto steering unit.

AS V8210BH / V8210EA-03 – Auto CPU PCB

Auto CPU board version found in V8210-series autopilots.

AS V8210CQ – I/O Repeater (Synchro) PCB

Input/output board that drives synchro heading repeaters.

AS V8210CU / V8210EU-00 – SSR Unit PCB

Solid state relay board that switches the steering solenoid / motor circuits.

AS V8210 – Servo Amp PCB

Servo amplifier that compares rudder order with rudder feedback and drives the steering output.

V8210EH-04 – DC Unit (Dimmer Controller)

DC power / panel illumination dimmer board of the PT200.

AS V8210DM and V8210FW-00 – PCB cards

Further boards of the same V8210 family (function to be confirmed with the customer's unit).

Main Components & Related Units

The PT200 system also includes the PB316 Auto Steering Unit, the PH-710-08 Switch Unit, synchro repeater units and the rudder feedback transmitter (potentiometer). The servo amp is fed by the auto CPU and drives the steering output through the SSR unit (AS V8210CU / V8210EU-00).

Marine & Industrial Applications

  • Autopilot steering control on bulk carriers, tankers, general cargo and container ships
  • Follow-up (FU) steering systems with solenoid-valve or motor-driven steering gear
  • Replacement and onboard spare for vessels with Yokogawa PT100 / PT200 autopilots

yokogawa navitec as v8210 servo amp pcb pt200 autopilot servo amplifier board rudder follow-up control

Servo amplifier board for Yokogawa autopilot steering – rudder follow-up control

Common Problems & Troubleshooting

  • Rudder hunting or overshoot – gain or dead-band setting out of adjustment, drifting trimmer, or ageing capacitors.
  • Rudder does not move in AUTO – no output from the servo amp, failed SSR unit, blown fuse or missing supply voltage.
  • Rudder moves to one side only – faulty feedback potentiometer signal or failed output driver.
  • Steering failure alarm – check feedback signal, supply voltages and connectors CN1–CN4 before replacing the board.

Safety note: always change to hand steering and isolate the autopilot power before removing or fitting any PCB. Adjustments must be made by a qualified technician following the Yokogawa service manual.

Maintenance Tips

  • Keep the steering stand dry and free from dust and salt.
  • Check connector tightness and cable condition during routine bridge equipment checks.
  • Replace the rudder feedback potentiometer periodically, as recommended by the manufacturer.
  • Record trimmer settings before replacing a board so the new board can be set the same way.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies the AS V8210 Servo Amp PCB and other Yokogawa V8210 boards. For a quotation, send us the full board number (including the letters after V8210), a clear photo of the PCB, the autopilot model (PT100 / PT200) and your vessel name or delivery port.

Worldwide Supply & Shipping

We ship Yokogawa autopilot PCBs to vessels and ship managers across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos). Africa and Oceania ports are also served by express courier.

Why This Equipment Is Still Used

Many vessels still sail with Yokogawa PT100 and PT200 autopilots because the systems are robust and well understood by crews. Since the boards are no longer produced new, refurbished boards are the fastest and most economical way to keep the steering system working.

FAQ

Q: What does the Yokogawa AS V8210 Servo Amp PCB do?
A: It compares the rudder order with the rudder feedback and drives the steering output so the rudder follows the autopilot command.

Q: Which autopilot uses this board?
A: Yokogawa Navitec PT100 / PT200 series autopilots with the V8210 board family. Please confirm with your board number.

Q: Is the board new or refurbished?
A: This listing is for a refurbished board. Other conditions may be available on request.

Q: What other V8210 boards can you supply?
A: V8210AA, V8210AM, V8210AB, V8210AC, V8210BA, V8210BH, V8210CQ, V8210CU (V8210EU-00), V8210EH-04 and others, subject to availability.

Q: Can I replace the servo amp myself?
A: Yes, with the autopilot switched off and hand steering engaged, but settings should be checked by a qualified technician.

Q: Do you supply the SSR unit that works with this board?
A: Yes – the Yokogawa AS V8210CU SSR Unit (V8210EU-00) is also in our stock.

Q: What information do you need for a quotation?
A: Board number, PCB photo, autopilot model and delivery port.

Q: Do you ship worldwide?
A: Yes, we ship to ports and offices worldwide by express courier.

Q: Is the PT200 autopilot still supported?
A: The PT200 is an older model; spare boards are mainly available as refurbished or used parts.

Short Product Description

Refurbished Yokogawa Navitec AS V8210 Servo Amp PCB for PT100 / PT200 ship autopilots. The board compares the rudder order with the rudder feedback signal and drives the steering output for accurate course keeping. Made in Japan, with VR1–VR10 adjustment trimmers, TEST points and CN1–CN4 connectors. Suitable as a replacement or onboard spare for vessels with Yokogawa V8210-series autopilot electronics. SM MARINE SERVICE™ also supplies the matching SSR unit, CPU, key display and I/O boards, and ships worldwide. Send your board number and vessel details for a quick quotation.

Related Yokogawa Autopilot Parts – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Send us your board part number, a clear photo of the PCB and your vessel or delivery port – we will reply quickly with a quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 10:50 PM
Need Help? Chat with us