WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Daihatsu MD-9M Oil Mist Density Indicator – Oil Mist Detector Panel (Brand New)

Item Code:

MD-9M

Brand:

Daihatsu

Condition:

New product


Daihatsu MD-9M Oil Mist Density Indicator / Oil Mist Detector Panel – Brand New

Manufacturer Daihatsu Diesel (model MD-9M; the brand name is not printed on this front panel)
Model MD-9M
Product Type Oil Mist Density Indicator – oil mist detector (OMD) front / display panel
Part / Serial Number Not clearly visible in the supplied photograph
Panel Language Japanese and English instructions
Condition Brand New

Product Introduction

SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies a brand new MD-9M Oil Mist Density Indicator panel for Daihatsu oil mist detectors. The MD-9M is used on diesel engines to watch the oil mist level inside the crankcase and to raise an alarm before a dangerous crankcase explosion can happen.

What Is This Equipment?

An oil mist detector draws air samples from the engine crankcase through inlet ports and measures how dense the oil mist is with a light source and a phototube. The MD-9M panel shows the mist density on an LED bar (0–15), gives a SLIGHT ALARM at level 10 and a FINAL ALARM at level 15, and has GAIN, PORT NO., RESET, TEST and SOURCE controls.

Main Features

  • LED bar-graph oil mist density indicator, scale 0–15 (green, yellow, red)
  • Lamps: FINAL ALARM, SLIGHT ALARM, TROUBLE, NORMAL / TEST MODE (flicker)
  • PORT NO. selector – set to 9 at the factory
  • GAIN adjustment potentiometer
  • RESET, TEST and SOURCE push buttons
  • Printed operating instructions in Japanese and English
  • Wiring harness connected at the rear

daihatsu md-9m oil mist density indicator oil mist detector panel
MD-9M Oil Mist Density Indicator panel – brand new, at SM MARINE SERVICE™

Main Technical Specifications (from the panel)

Display LED bar graph, 0–15
Slight alarm Level 10
Final alarm Level 15
Normal gain setting Indicator at 2–4 LEDs under maximum engine load
Sampling ports 9 (factory setting); unused inlet ports closed with rubber plugs
Power supply / output ratings Not clearly visible in the supplied photograph

Inside the Unit: PCBs, Modules & Part Numbers

No PCB or board part numbers are visible in the photograph, and we did not find verified board numbers in public sources. The units below are typical for this type of detector and are listed by function only (part numbers Not verified):

Display / LED Indicator Board

Drives the 0–15 LED bar and the alarm lamps on the front panel.

Main Control / Amplifier PCB

Processes the phototube signal, compares it with the alarm levels and operates the alarm output contacts. The PORT NO. switch is visible through the panel window.

Power Supply PCB

Supplies the electronics, light source and suction fan. Rating not visible in the photograph.

Detector Cell (Light Source and Phototube)

Measures the oil mist density of the sampled air. The test procedure shades the phototube to check the alarms.

Main Components & Related Units

A complete system includes the MD-9M main unit with this indicator panel, the detector cell, suction fan, sampling pipes from each crankcase compartment, rubber plugs for unused ports and alarm cables to the engine alarm system. Daihatsu also builds the MD-SX sensor-type detector.

Marine & Industrial Applications

  • Daihatsu marine generator engines
  • Main and auxiliary diesel engine crankcase protection
  • Power plant diesel generators

Common Problems & Troubleshooting

  • TROUBLE lamp on – check the light source, the detector cell and the power supply
  • False alarms – clean the detector cell and sampling pipes, and re-adjust GAIN at maximum engine load
  • Reading always zero – check suction, blocked inlet ports and the phototube
  • No display – check the power supply and the wiring harness

Safety note: a real oil mist alarm can mean a risk of crankcase explosion. Slow down or stop the engine and follow the engine maker's instructions. Never open the crankcase immediately after an alarm.

Maintenance Tips

  • Test SLIGHT and FINAL alarms regularly using the TEST button
  • Keep the detector cell and sampling pipes clean
  • Keep unused inlet ports plugged
  • Re-check GAIN after maintenance

Spare Parts & Replacement Availability

For a quotation, send us a photo of the nameplate on your MD-9M main unit, the engine model, and the part you need.

Worldwide Supply & Shipping

We ship oil mist detector parts to ship owners, ship managers and repair yards across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul) and Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta). We also deliver to the Americas (Houston, Panama, Santos, Callao, Buenos Aires) and Africa (Durban, Lagos, Mombasa).

Why This Equipment Is Still Used

Many ships run Daihatsu generator engines fitted with the MD-9M. Replacing only the failed part keeps the existing detector system running without new pipes or cables.

FAQ

What is the MD-9M? It is an oil mist density indicator / oil mist detector for diesel engine crankcases.

Who makes the MD-9M? It is a Daihatsu Diesel oil mist detector model.

What does SLIGHT ALARM mean? The oil mist reached level 10 on the indicator.

What does FINAL ALARM mean? The oil mist reached level 15; immediate action is needed.

How is GAIN set? Adjust so the indicator shows 2–4 LEDs at maximum engine load.

What does PORT NO. mean? It is the number of sampling ports in use; the factory setting is 9.

Do you have the MD-9M PCB part numbers? They are not visible on this panel; send us your board photo and we will check.

Is this panel new? Yes, it is brand new.

Do you supply the MD-SX too? Yes, see the related products below.

Do you ship worldwide? Yes, to all major ports.

Short Product Description

Brand new MD-9M Oil Mist Density Indicator panel for Daihatsu oil mist detectors. The panel shows crankcase oil mist density on a 0–15 LED bar and gives SLIGHT ALARM (level 10), FINAL ALARM (level 15), TROUBLE and NORMAL / TEST MODE indications. It has PORT NO., GAIN, RESET, TEST and SOURCE controls with Japanese and English instructions. Used on Daihatsu marine generator and diesel engines to protect against crankcase explosions. Available from SM MARINE SERVICE™ with worldwide shipping. Send us your nameplate photo for an exact quotation.

Related Oil Mist Detectors & Parts – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Contact us today for a fast quotation on Daihatsu MD-9M oil mist detector parts.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:46 PM
Need Help? Chat with us