WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Sperry Marine 65810812-6 Radar Modulator PCB – 10kW X-Band Transceiver Board (Refurbished, Like New)

Item Code:

65810812-6

Brand:

Sperry Marine

Condition:

Refurbished


Sperry Marine 65810812-6 Radar Modulator PCB – 10kW X-Band Transceiver Board (Refurbished, Like New)

Manufacturer Sperry Marine (Northrop Grumman Sperry Marine)
Product Radar modulator PCB, 10 kW
Part number 65810812-6 (as supplied with the board; yellow label reading Not clearly visible in the supplied photograph)
Label details REV. F, S/N 05976
Potted module on board 96400826411, GTK40127773, SER 909
Other marked part 96400553 NE11301
Factory note on board Set magnetron current at TP100 (modulator PCB) on long pulse to approximately 2.0 V
Relays Finder 55.34 series relays
Daughter board Small PCB at top right (label partly visible)
Condition Refurbished – very clean, like new

Product Introduction

The Sperry Marine 65810812-6 is the modulator PCB of a Sperry Marine 10 kW radar transceiver. It produces the high-voltage pulses that fire the magnetron, so it is the heart of the radar transmitter. SM MARINE SERVICE™ supplies this modulator board refurbished in like-new condition. See more radar spares at https://www.smmarineservice.com/.

What Is This Equipment?

A ship's radar transceiver has three main parts: the modulator, the magnetron and the receiver. The modulator PCB takes the trigger from the radar processor and sends a short, powerful pulse through the pulse transformer to the magnetron, which then transmits the microwave pulse. If the modulator fails, the radar has no transmission and no picture. Sperry Marine uses the same naming pattern for its modulator boards in different power classes – for example T65825812 (25 kW) and T65830812 (30 kW) – while this board is the 10 kW version.

Main Features

  • 10 kW radar modulator for Sperry Marine radar transceivers
  • Potted pulse module (96400826411 / GTK40127773)
  • Pulse-length selection relays (Finder 55.34 series)
  • Magnetron current test point TP100 for long-pulse adjustment (approx. 2.0 V)
  • Large heatsink rail with power semiconductors
  • Rev. F, clean like-new condition

sperry marine 65810812-6 radar modulator pcb 10kw

Sperry Marine 65810812-6 10 kW radar modulator PCB – Rev. F, S/N 05976

Main Technical Specifications

Board type Radar modulator PCB
Power class 10 kW (as supplied)
Revision F
Serial no. 05976
Magnetron current setting TP100, long pulse ≈ 2.0 V (factory label)
Supply voltages Not verified
Compatible transceiver Sperry Marine 10 kW X-band transceiver – exact model Not verified

Inside the Unit: PCBs, Modules & Part Numbers

Modulator main board – 65810812-6

Generates the high-voltage pulses for the magnetron and switches between short, medium and long pulse.

Pulse module – 96400826411 / GTK40127773

Black potted module on the board (marked SER 909) – part of the pulse-forming / pulse transformer circuit.

Component 96400553 (NE11301)

Wound component near the top of the board (choke / transformer). Function Not verified.

Daughter board

Small PCB mounted at the top right with test points TP3–TP12. Board number Not clearly visible in the supplied photograph.

Power semiconductors and heatsink rail

Switching devices clamped to the aluminium rail at the bottom of the board.

Related Sperry modulator boards

T65825812 / 65825812-6 (25 kW modulator, assembly 65 801 816-1) and T65830812 (30 kW modulator).

Main Components & Related Units

  • Magnetron and pulse transformer of the 10 kW transceiver
  • Receiver / IF board and transceiver power supply
  • Radar processor and display (Sperry BridgeMaster family)
  • 25 kW and 30 kW modulator versions for larger transceivers

Marine & Industrial Applications

  • Sperry Marine X-band ship radars (10 kW transceivers)
  • Replacement of a failed or burnt modulator board
  • Spare board for fleet radar maintenance

Common Problems & Troubleshooting

  • No transmission / no radar picture – check the modulator supply, trigger and the magnetron current at TP100.
  • Low magnetron current – adjust per the factory label (long pulse ≈ 2.0 V at TP100); if it cannot be reached, the magnetron may be worn.
  • Burnt components or relay fault – replace the modulator PCB.

Safety note: the modulator works with dangerous high voltage. Switch off the radar, isolate the supply and wait for capacitors to discharge before touching the board. Never transmit with personnel near the antenna.

Maintenance Tips

  • Check magnetron current regularly and record it.
  • Keep the transceiver dry and the heatsink clean.
  • Re-adjust magnetron current after changing the magnetron or modulator.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies the Sperry Marine 65810812-6 10 kW modulator PCB refurbished, and other radar transceiver spares. For a quotation, send a photo of your old board label, your radar model and your delivery port.

Worldwide Supply & Shipping

We ship radar spares to ships in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier to African ports such as Lagos and Durban.

Why This Equipment Is Still Used

Many ships carry Sperry Marine radars. Changing only the modulator PCB brings the transmitter back to life at a fraction of the cost of a new transceiver.

FAQ

Q: What is the Sperry Marine 65810812-6?
A: The 10 kW modulator PCB of a Sperry Marine radar transceiver.

Q: What does a modulator PCB do?
A: It sends the high-voltage pulses that fire the magnetron.

Q: Is there a 25 kW or 30 kW version?
A: Yes – T65825812 (25 kW) and T65830812 (30 kW) are the higher-power modulator boards.

Q: What is 96400826411?
A: The black potted pulse module mounted on this board (also marked GTK40127773).

Q: How do I set the magnetron current?
A: The factory label says: at TP100 on long pulse, approximately 2.0 V.

Q: What revision is it?
A: Rev. F, serial number 05976.

Q: Is it new?
A: It is refurbished and in very clean, like-new condition.

Q: Which radar models use it?
A: Sperry Marine 10 kW X-band transceivers – please confirm with your old board number.

Q: What do you need for a quotation?
A: Old board label photo, radar model and delivery port.

Short Product Description

Refurbished, like-new Sperry Marine 65810812-6 radar modulator PCB for 10 kW transceivers, Rev. F, S/N 05976. The board generates the high-voltage pulses that drive the magnetron and carries a potted pulse module 96400826411 / GTK40127773, Finder pulse-length relays and a heatsink rail with power devices. A factory label gives the magnetron-current setting at TP100 (long pulse about 2.0 V). Higher-power versions are T65825812 (25 kW) and T65830812 (30 kW). SM MARINE SERVICE™ ships worldwide – send your board label for a quotation.

Related Sperry Marine & Radar Transceiver Parts – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Send us your board part number, a clear photo of the PCB and your vessel or delivery port – we will reply quickly with a quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 10:50 PM
Need Help? Chat with us