WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

NAGANO KEIKI KE22 Differential Pressure Transmitter with Remote Diaphragm Seals – Marine Pneumatic Tank Level & Pressure Measurement (240–1200 mmAq, New)

Item Code:

NAGANO KEIKI KE22 Pressure Transmitter

Brand:

NAGANO KEIKI Co., Ltd.

Condition:

New product


NAGANO KEIKI KE22 Differential Pressure Transmitter with Remote Diaphragm Seals – Marine Pneumatic Tank Level & Pressure Measurement (240–1200 mmAq, New)

Manufacturer Nagano Keiki Co., Ltd., Tokyo, Japan
Type KE22 Pneumatic Pressure Transmitter – DIFF (differential pressure)
Pressure range 240–1200 mmAq (nameplate)
Supply air 1.3–1.5 kgf/cm² (nameplate)
Transmitted air (output) 0.2–1 kgf/cm² (nameplate)
Serial numbers 0409280 and 0409281 (nameplates)
Date 12.2010 (nameplate)
Supplied with Two remote diaphragm seals per transmitter (red cap = one side, blue cap = other side) with armoured capillary tubes
Condition New product
Category Accessories

Product Introduction

The NAGANO KEIKI KE22 is a pneumatic differential pressure transmitter used on ships for tank level and pressure measurement. These units come complete with flanged remote diaphragm seals and stainless armoured capillaries. SM MARINE SERVICE™ supplies them new to shipowners, ship managers and repair yards worldwide. More Nagano Keiki transmitters and marine instruments are listed at https://www.smmarineservice.com/.

What Is This Equipment?

The KE22 measures the difference between two pressures – for example the liquid head at the bottom of a tank and the gas pressure at the top – and turns it into a 0.2–1 kgf/cm² air signal. Because it works only with instrument air and no electricity, it is safe for tanks with fuel, oil or cargo. The remote diaphragm seals keep the process liquid away from the transmitter body.

Main Features

  • Pneumatic differential pressure measurement, no electrical power needed
  • Range 240–1200 mmAq, output 0.2–1 kgf/cm²
  • Flanged remote diaphragm seals with stainless armoured capillary tubes
  • Rain-proof aluminium case with mounting bracket
  • Made in Japan by Nagano Keiki
  • Brand new, in original packing

nagano keiki ke22 differential pressure transmitter remote diaphragm seal 240-1200 mmaq

NAGANO KEIKI KE22 differential pressure transmitters with remote diaphragm seals – new, SM MARINE SERVICE™ stock

Main Technical Specifications

Model KE22 (DIFF)
Measuring range 240–1200 mmAq
Supply air 1.3–1.5 kgf/cm²
Output 0.2–1 kgf/cm²
Process connection Remote diaphragm seals with capillary
Power None – fully pneumatic

Inside the Unit: PCBs, Modules & Part Numbers

The KE22 is a pneumatic (force-balance) instrument and has no PCB. Its main parts are:

Differential pressure sensing element

Senses the pressure difference between the high and low pressure sides.

Pneumatic relay and feedback bellows

Converts the force into a 0.2–1 kgf/cm² output signal.

Range bar / zero and span adjustment

Sets the measuring range and zero point.

Remote diaphragm seals with capillaries

Transfer process pressure from the tank to the transmitter through a sealed fill liquid.

Related Nagano Keiki models

KE21 (pressure version of the same series), KE22-121 (differential pressure model code found in the KE2 catalogue).

Main Components & Related Units

A complete loop includes the KE22 transmitter, the remote seals on the tank, an air filter regulator (1.3–1.5 kgf/cm² supply), and a pneumatic receiver gauge, level indicator or controller in the control room.

Marine & Industrial Applications

  • Fuel oil, lube oil, ballast and fresh water tank level measurement
  • Cargo and slop tank level and pressure monitoring
  • Differential pressure across filters and strainers
  • Boiler drum and hot well level measurement

nagano keiki ke22 pneumatic pressure transmitter tank level new

Two NAGANO KEIKI KE22 transmitter sets with remote diaphragm seals, brand new

Common Problems & Troubleshooting

  • Output stays at 0.2 kgf/cm² – check supply air, blocked restriction or damaged diaphragm seal.
  • Wrong level reading – zero/span drift or loss of fill liquid in the capillary; recalibrate or replace the seal set.
  • Unstable output – wet or dirty instrument air; check the filter regulator.

Safety note: isolate and depressurise the tank connection before removing the diaphragm seals. Never cut or open a filled capillary.

Maintenance Tips

  • Keep instrument air clean and dry.
  • Protect the capillary tubes from sharp bends and impact.
  • Check zero and span during dry-dock or after replacing seals.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies NAGANO KEIKI KE22 transmitters with remote seals (240–1200 mmAq), and other KE21 / KE22 units. For a quotation, send your nameplate photo (type, range, supply and output), the capillary length and your delivery port.

Worldwide Supply & Shipping

We ship Nagano Keiki transmitters to ships and ship managers in the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Piraeus, Rotterdam, Hamburg, Istanbul), Asia (Singapore, Shanghai, Busan, Mumbai) and the Americas (Houston, Panama, Santos), with express courier to African and Oceania ports too.

Why This Equipment Is Still Used

Pneumatic transmitters need no electrical power, so they are naturally safe near fuel and cargo tanks. Many Japanese-built ships still use KE22 loops, and a like-for-like replacement keeps the existing receivers and piping.

FAQ

Q: What is the NAGANO KEIKI KE22?
A: A pneumatic differential pressure transmitter with a 0.2–1 kgf/cm² air output.

Q: What range are these units?
A: 240–1200 mmAq, as written on the nameplates.

Q: What air supply is needed?
A: 1.3–1.5 kgf/cm².

Q: Are the diaphragm seals included?
A: Yes, each transmitter comes with two flanged remote diaphragm seals and capillaries.

Q: Is it new?
A: Yes, these units are new.

Q: What are the serial numbers?
A: 0409280 and 0409281, dated 12.2010.

Q: Does it have a PCB?
A: No, the KE22 is fully pneumatic.

Q: What is the difference between KE21 and KE22?
A: KE21 measures pressure; KE22 measures differential pressure.

Q: What do you need for a quotation?
A: Nameplate photo, range, capillary length and delivery port.

Short Product Description

New NAGANO KEIKI KE22 pneumatic differential pressure transmitters from Nagano Keiki Co., Ltd., Japan, supplied with flanged remote diaphragm seals and stainless armoured capillaries. Range 240–1200 mmAq, supply air 1.3–1.5 kgf/cm², output 0.2–1 kgf/cm². Used on ships for fuel oil, ballast, water and cargo tank level and pressure measurement without electrical power. Serial numbers 0409280 and 0409281, dated 12.2010. Ideal as a replacement or onboard spare. SM MARINE SERVICE™ ships worldwide – send your nameplate photo for a quick quotation.

Related Nagano Keiki Pressure & Level Transmitters – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Send us your transmitter nameplate photo, range and your vessel or delivery port – we will reply quickly with a quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 10:50 PM
Need Help? Chat with us