WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

Søren T. Lyngsø 609004610 V Relay Output PCB Card 064.511.104 Rev.1 – Lyngsø Marine Alarm System

Item Code:

609004610 V / 064.511.104

Brand:

SOREN T. LYNGSO (LYNGSO MARINE)

Condition:

Refurbished


Søren T. Lyngsø (Lyngsø Marine) 609004610 V Relay Output PCB Card – 064.511.104 Rev.1

Product Information

Manufacturer Søren T. Lyngsø, Denmark (Lyngsø Marine / Lyngsoe Marine, later SAM Electronics)
Type (label) 609004610 V
Board number (printed) 064.511.104
Revision Rev. 1 (marked on component side)
Serial No. (NR) 205353 (label close-up)
Date code (W) 9606
Product Type Relay output PCB card for Lyngsø engine control & alarm system
Visible Components 16 relays with green LED indicators, fuse holders, plug-in terminal blocks per channel, two 4-way terminal blocks (A-B-C-D), flat-cable connector
Country of Manufacture Denmark
Condition Refurbished
Supplier SM MARINE SERVICE™

Product Introduction

The Søren T. Lyngsø 609004610 V (board 064.511.104) is a relay output PCB card from the Danish marine automation maker Lyngsø Marine. Cards of this type are used in Lyngsø (later SAM Electronics) engine control and alarm systems on board ships. SM MARINE SERVICE™ supplies the 609004610 V card as a replacement spare for vessels worldwide through https://www.smmarineservice.com/.

What Is This Equipment?

The 609004610 V is a plug-in relay card. It receives control signals from the alarm / monitoring electronics through its flat-cable connector and switches 16 relay outputs, each with its own LED, fuse and plug-in terminal block. The relay outputs are typically used to drive alarm lamps, horns, group alarms or external equipment in the engine room and on the bridge. The same type number appears with different board codes and versions, such as 064.511.104, 064.511.503 / 064.511.504 and versions V01 / Rev 1.

Main Features

  • Genuine Søren T. Lyngsø card, made in Denmark
  • 16 relay outputs with individual green LED status indicators
  • Per-channel fuse holders and plug-in green terminal blocks for easy service
  • Flat-cable (IDC) connector to the system bus / control electronics
  • Suppression components (capacitors, varistors) for marine EMC environment
  • Board revision marking Rev. 1

Soren T Lyngso 609004610 V relay output PCB card 16 relays Lyngso Marine alarm system - SM MARINE SERVICE
Søren T. Lyngsø 609004610 V relay output card (component side, Rev. 1) – SM MARINE SERVICE™

Main Technical Specifications

Type 609004610 V
Board code 064.511.104 (other versions: 064.511.503, 064.511.504)
Function Relay output card, 16 channels (counted from the photograph)
Indicators 1 LED per relay channel
Connections Flat-cable connector, 16 channel terminal blocks, 2 × 4-way terminal blocks (A-B-C-D)
Dimensions / weight (typical) approx. 30 × 12.5 × 3 cm, approx. 0.54–0.65 kg (trader data)
Relay / coil voltage Not clearly visible in the supplied photograph

Inside the Unit: PCBs, Modules & Part Numbers

609004610 V – Relay Output PCB Card (this product)

16-channel relay output card, board 064.511.104, Rev. 1.

064.511.503 / 064.511.504 – Other 609004610 Board Versions

Other board codes reported for the 609004610 type (for example 609004610 V01 with 064.511.503). Interchangeability with 064.511.104 is not verified.

609004410 – Related Lyngsø PCB Card

Related Lyngsø card type reported with board codes 064.509.503 and 064.508.204. Function not verified.

609004060 – Related Lyngsø PCB Card

Related Lyngsø card type reported with board code 064.581.104. Function not verified.

609024110 – Lyngsø Alarm System PCB

Lyngsø / GPV Elbau card reported for the alarm system in the engine control room (064.783.102 / 064.783.202 / 064.783.502).

Main Components & Related Units

  • Lyngsø Marine UMS 2100 / 2100i alarm and monitoring system panels
  • SAM Electronics 2100 / 2200 alarm panels, DAP 2200 monitoring and control system
  • Lyngsø ZM 411 CPU module, DEM 401 digital input module, DZM402 speed relay module
  • EGS 2000 governor control and DMS 2100i bridge manoeuvring system

Marine & Industrial Applications

  • Engine room alarm and monitoring systems (UMS) on merchant ships
  • Alarm group outputs, horns, flash lights and remote alarm panels
  • Engine control and safety systems from Lyngsø Marine / SAM Electronics
  • Industrial control panels needing multi-channel relay outputs

Lyngso 609004610 V label NR W 9606 board 064.511.104 Denmark - SM MARINE SERVICE
Label close-up: Søren T. Lyngsø Denmark, TYPE 609004610 V, board 064.511.104

Common Problems & Troubleshooting

  • One output not working: check the channel fuse, the LED and the relay; check the terminal plug and field wiring.
  • All outputs dead: check the card supply, the flat cable and connector, and the card seating in the rack.
  • LED on but no output: worn relay contacts – the relay or card may need replacement.
  • Safety: switch off and isolate the system before removing the card; relay outputs may carry external voltages.

Maintenance Tips

  • Keep the card rack clean and dry; check flat-cable connectors for corrosion.
  • Replace blown fuses only with the same rating.
  • Note the type, board code and version of the old card before ordering a spare.
  • Test all alarm outputs after replacement.

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies Søren T. Lyngsø 609004610 V cards and other Lyngsø / SAM Electronics automation spares. For a quotation please send the type (609004610 V), the board code printed on the PCB (for example 064.511.104), the version / revision, the system name (for example UMS 2100) and the vessel name. A photo of the label helps us match it exactly.

Worldwide Supply & Shipping

We supply marine automation spares to ship owners, managers and repair yards across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Rotterdam, Hamburg, Piraeus, Istanbul, Copenhagen), Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta), the Americas (Houston, Panama, Santos, Buenos Aires, Callao) and Africa. Parts are shipped by courier to the vessel's agent or to our customer's office.

Why This Equipment Is Still Used

Many ships built in the 1990s and 2000s still run Lyngsø Marine alarm and engine control systems. These systems are reliable and approved by class, so owners keep them in service and replace only the failed card instead of changing the whole automation system.

FAQ

What is Lyngsø 609004610 V?
It is a relay output PCB card made by Søren T. Lyngsø (Lyngsø Marine), Denmark, for marine engine control and alarm systems.

What is 064.511.104?
It is the board code printed on this 609004610 V card.

Is 064.511.104 the same as 064.511.504?
Both are reported for type 609004610; exact interchangeability is not verified – send us your old card details.

How many outputs does the card have?
The card in the photo has 16 relays, each with an LED and fuse.

Which system uses this card?
Lyngsø Marine / SAM Electronics engine control and alarm systems.

Who makes Lyngsø cards today?
Lyngsø Marine became part of SAM Electronics; some 609004610 cards are also marked GPV Elbau Electronics.

What does W 9606 mean?
It is the date / week code on the label.

What condition is this card?
Refurbished.

Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships marine spare parts worldwide.

Short Product Description

Søren T. Lyngsø 609004610 V relay output PCB card, board 064.511.104 Rev.1, made in Denmark for Lyngsø Marine / SAM Electronics engine control and alarm systems. The card carries 16 relay outputs, each with a green LED, fuse holder and plug-in terminal block, plus a flat-cable connector to the system electronics. It is used to drive alarm lamps, horns, group alarms and external equipment from the engine room alarm and monitoring system. Related versions include 064.511.503 and 064.511.504. Supplied as a replacement spare by SM MARINE SERVICE™, worldwide marine automation spare parts supplier.

Related Lyngsø Marine & SAM Electronics Automation Spares – In Stock at SM MARINE SERVICE™

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need a Lyngsø 609004610 V card or other Lyngsø / SAM Electronics spares? Send us your card label and vessel details today for a quick quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 9:46 PM
Need Help? Chat with us