STELLA GAMMA
LYNGSO MARINE / SAM ELECTRONICS
Refurbished
| System | STELLA GAMMA marine automation controller |
| Manufacturer | Søren T. Lyngsø / Lyngsø Marine (later SAM Electronics); modules also made by Elbau / GPV Electronics, Denmark |
| Rack contents (as photographed) | 1 × GAMMA CPU, 2 × GAMMA SI/O, 3 × GAMMA DI/DO, rack with mounting brackets and Schroff front panels |
| Slot labels | 0.2, 0.3, 0.4 on the DI/DO modules |
| CPU front panel | EXT. POWER and INT. POWER LEDs, RESET, RUN LED, STATUS LEDs 0–3, battery compartment ("Exchange With Power On"), 9-pin D-sub connector |
| SI/O front panel | Channel LEDs CH0–CH3 |
| Type / serial numbers | Not clearly visible in the supplied photograph |
| Condition | Refurbished |
| Supplier | SM MARINE SERVICE™ |
This is a complete STELLA GAMMA control rack from Lyngsø Marine, fitted with a Gamma CPU, two Gamma SI/O serial interface modules and three Gamma DI/DO digital input/output modules. STELLA GAMMA is the controller platform used in Lyngsø Marine / SAM Electronics marine automation, engine control and monitoring systems. SM MARINE SERVICE™ supplies the complete rack and individual Gamma modules as replacement spares for ships worldwide through https://www.smmarineservice.com/.
The STELLA GAMMA rack is a small modular controller. The Gamma CPU runs the application program and supervises the modules; the SI/O modules provide serial communication channels to other system units, panels or the alarm system; and the DI/DO modules read digital signals (switches, contacts) and drive digital outputs (relays, lamps, valves). The same platform is also built with Gamma AI/AO analog modules depending on the application.

Lyngsø Marine STELLA GAMMA rack with Gamma CPU, 2 × Gamma SI/O and 3 × Gamma DI/DO – SM MARINE SERVICE™
| Platform | STELLA GAMMA (Lyngsø Marine / SAM Electronics) |
| CPU module | Gamma CPU – LEDs: EXT. POWER, INT. POWER, RUN, STATUS 0–3; RESET; battery; 9-pin D-sub |
| Serial I/O | 2 × Gamma SI/O, channel LEDs CH0–CH3 |
| Digital I/O | 3 × Gamma DI/DO |
| Analog I/O | Not fitted in this rack (Gamma AI/AO available in the same family) |
| Supply voltage / I/O ratings | Not clearly visible in the supplied photograph |
The type numbers below are known STELLA GAMMA part numbers from the market. The exact labels of the modules in this rack are not visible in the photograph, so they are not verified for this unit.
Main processor card of the rack. Known types: 609008210 A (Lyngsø Marine / Elbau, board 064.505.504) and 609002110 / 609002110 V (board 064.507.206).
Serial communication card. Known types: 609003410 V (EPR 609003406, board 064.512.106) and 609003460.
Digital input and output card. Known type: 609003310.
Analog card of the same family, type 609003110 (not fitted in this rack).
Rack (cassette) type 606.188.000 is reported with reference 064.535.493 and TYP-NR 271.159 214 – not verified for this rack.
CPU memory backup battery behind the front cover; can be exchanged with power on.
SM MARINE SERVICE™ supplies complete STELLA GAMMA racks and individual Gamma CPU, SI/O, DI/DO and AI/AO modules. For a quotation please send the type numbers on the module labels (for example 609008210 A, 609003410 V, 609003310), the system name, the quantity and the vessel name. Photos of the labels help us match your units exactly.
We supply marine automation spares to ship owners, managers and repair yards across the Middle East (Dubai, Fujairah, Jeddah, Doha), Europe (Rotterdam, Hamburg, Piraeus, Istanbul, Copenhagen), Asia (Singapore, Shanghai, Busan, Mumbai, Jakarta), the Americas (Houston, Panama, Santos, Buenos Aires, Callao) and Africa. Parts are shipped by courier to the vessel's agent or to our customer's office.
Many ships still run Lyngsø Marine / SAM Electronics automation built on STELLA GAMMA controllers. The systems are class-approved and reliable, so owners keep them running and replace only a failed module or rack instead of re-engineering the whole automation system.
What is STELLA GAMMA?
A modular controller platform used in Lyngsø Marine / SAM Electronics marine automation systems.
Which modules are in this rack?
One Gamma CPU, two Gamma SI/O and three Gamma DI/DO modules.
What is the part number of the Gamma CPU?
Known types are 609008210 A and 609002110; please send your label to confirm.
What is the Gamma SI/O part number?
Known types are 609003410 V and 609003460.
What is the Gamma DI/DO part number?
A known type is 609003310.
Can I buy single modules?
Yes, please ask for individual Gamma modules.
Can the CPU battery be changed with power on?
The CPU front panel is marked "Battery – Exchange With Power On".
What condition is this rack?
Refurbished.
Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships marine spare parts worldwide.
Lyngsø Marine STELLA GAMMA control rack with one Gamma CPU, two Gamma SI/O serial interface modules and three Gamma DI/DO digital input/output modules. The Gamma CPU has power, run and status LEDs, a reset button, a backup battery that can be exchanged with power on and a 9-pin serial connector. STELLA GAMMA controllers are used in Lyngsø Marine / SAM Electronics engine control, alarm and monitoring systems on ships. Known module types include 609008210 A and 609002110 (CPU), 609003410 V and 609003460 (SI/O), 609003310 (DI/DO) and 609003110 (AI/AO). Supplied by SM MARINE SERVICE™, worldwide marine automation spare parts supplier.
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
Need a STELLA GAMMA rack or a single Gamma CPU, SI/O or DI/DO module? Send us your module labels and vessel details today for a quick quotation.
Marine Equipment Supplier