WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image Product Image
Product Image
Product Image
Product Image
Product Image

Nakamura Electric JCS Crane Joystick Master Controller – Marine Deck Crane Multi-Directional Controller (New)

Item Code:

JCS (JCS-LU)

Brand:

NAKAMURA ELECTRIC MFG

Condition:

New product


Nakamura Electric JCS Crane Joystick Master Controller – Marine Deck Crane Multi-Directional Controller (New)

Product Information

Product Name Crane Joystick / Master Controller (multi-directional controller)
Manufacturer NAKAMURA ELECTRIC MFG. CO., LTD., Japan
Type JCS type multi-directional controller (label shows "JCS LU")
Label Data "BN A M5.7.10 C" and "BN B M5.7.10 D" with contact diagrams
Operation Lever with rubber boot, direction marked "A ↔ F"
Contacts Cam-operated contact blocks on both axes, rear terminal wiring
Serial Number / Rating Not clearly visible in the supplied photograph
Country of Manufacture Japan
Other Joysticks Many other crane joystick models available – see stock photo
Condition New
Supplier SM MARINE SERVICE™ – worldwide shipping

Product Introduction

This is a Nakamura Electric JCS type crane joystick (master controller) used to operate marine deck cranes, provision cranes, hose handling cranes and winches. The operator moves one lever to control hoisting, luffing and slewing in the direction of movement. SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies new Nakamura JCS joysticks and many other crane joysticks and master controllers worldwide.

What Is This Equipment?

Nakamura Electric describes the JCS type multi-directional controller as a unit where the lever is moved in any direction to switch circuits on and off and drive potentiometers, according to the direction and angle of the lever. Matching the lever direction with the machine movement lets the operator work intuitively and safely. Nakamura also makes a smaller and lower-cost JK type with fewer functions. The heavy-duty multi-directional controllers use cam switches or reed switch units for contacts, the operating directions can be changed by changing the guide plate, and they comply with JIS C4520 (operating switches) and JIS C4522 (control cam switches).

Main Features

  • Heavy-duty multi-directional (cross) lever controller
  • Cam switch contact blocks for several notches on each axis
  • Rubber boot for protection against dust and water
  • Operating directions selectable by guide plate
  • Can drive potentiometers or synchro devices for stepless control (version dependent)
  • Designed to JIS C4520 / JIS C4522
  • Robust Japanese construction for deck crane duty

Nakamura Electric JCS crane joystick master controller marine deck crane new - SM MARINE SERVICE
Nakamura Electric JCS crane joystick master controller with cam switch blocks – SM MARINE SERVICE™ photo

Main Technical Specifications

Maker Nakamura Electric MFG. Co., Ltd.
Type JCS multi-directional controller
Label JCS LU, BN A / BN B M5.7.10
Contact Type Cam switches (reed switch units possible)
Lever Single lever with rubber boot, black grip handle
Standards JIS C4520, JIS C4522
Application Crane / winch control
Condition New

Inside the Unit: PCBs, Modules & Part Numbers

A crane joystick has no PCB but several mechanical and electrical modules. All of these and other joystick types are available from SM MARINE SERVICE™ – send us your type label.

JCS Lever and Guide Plate Assembly

Lever mechanism with guide plate that sets the operating directions.

Cam Switch Contact Blocks

Cam-operated contacts that switch the control circuits for each notch.

Reed Switch Unit (optional)

Contactless switch unit for small-current circuits.

Potentiometer / Synchro Drive (optional)

Gives an analogue signal proportional to the lever angle.

Rubber Boot and Handle

Protects the mechanism from water and dust; handle may include push button.

Nakamura JK Type Controller

Compact, lower-cost Nakamura multi-directional controller.

Nakamura UOSM Universal Switch

Related Nakamura universal / cross-operation cam switch.

Main Components & Related Units

  • Crane cabin control console
  • Crane electro-hydraulic valves / motor control system
  • Limit switches and emergency stop circuits
  • Other crane joysticks and master controllers (see our stock photo)

Marine & Industrial Applications

  • Marine deck cranes and provision cranes
  • Hose handling cranes on tankers
  • Mooring and anchor winches
  • Engine room and gantry cranes, port and industrial cranes

Nakamura Electric JCS LU crane joystick label BN A BN B M5.7.10 - SM MARINE SERVICE
Bottom label: JCS LU, BN A / BN B M5.7.10 – Nakamura Electric MFG. Co., Ltd.

marine crane joystick master controllers in stock various models - SM MARINE SERVICE worldwide supplier
Various crane joysticks and master controllers available at SM MARINE SERVICE™

Common Problems & Troubleshooting

Safety note: Stop the crane, lower the load and isolate the control power before working on the joystick. Never bypass emergency stop or limit switch circuits.

  • Crane does not move in one direction – worn or dirty cam contact; check continuity of that notch.
  • Jerky speed control – worn potentiometer or loose cam.
  • Lever does not return to zero – broken return spring or damaged mechanism.
  • Water inside the joystick – torn rubber boot; replace boot and dry contacts.
  • Intermittent operation – loose terminal wires at the contact blocks.

Maintenance Tips

  • Check the rubber boot regularly and replace if cracked
  • Clean and inspect cam contacts during crane maintenance
  • Check terminal screws and wire markers
  • Test zero position and emergency stop before each operation

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies new Nakamura JCS crane joysticks and many other crane joystick models. For a fast quotation please send:

  • Photo of the type label under the joystick
  • Crane maker and model
  • Number of notches and axes needed
  • Vessel name and delivery port

We ship worldwide.

Why This Equipment Is Still Used

Cam-switch master controllers are simple, strong and easy to repair at sea, so many deck cranes still use them. A like-for-like joystick fits the existing console and wiring.

FAQ

1. What is a Nakamura JCS joystick?
A multi-directional controller (master controller) made by Nakamura Electric, used to operate cranes and winches.

2. What does the label "JCS LU" mean?
JCS is the controller type; the rest is the version code on the label.

3. Does it have a PCB?
No, it uses cam switch contact blocks (reed switch units or potentiometers on some versions).

4. What is the difference between JCS and JK type?
JK type has fewer functions and is smaller and cheaper than JCS.

5. Can the operating directions be changed?
Yes, by changing the guide plate.

6. Is this joystick new?
Yes, it is new.

7. Do you have other crane joysticks?
Yes, many models – see our stock photo and send us your label.

8. Why does my crane not move in one direction?
Often a worn cam contact in the joystick; check that notch.

9. Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide.

Short Product Description

New Nakamura Electric JCS crane joystick master controller, supplied by SM MARINE SERVICE™. Made in Japan by Nakamura Electric MFG. Co., Ltd., this heavy-duty multi-directional controller lets the operator control marine deck cranes, provision cranes, hose handling cranes and winches with one lever. It uses cam-operated contact blocks on both axes, has a protective rubber boot and black grip handle, and is built to JIS C4520 and JIS C4522. The label shows JCS LU with BN A / BN B M5.7.10 contact data. Many other crane joystick and master controller models are also available. Worldwide shipping.

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need a crane joystick or master controller? Send us your label photo today for a fast quotation.


Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 4:47 AM
Need Help? Chat with us