330180-50-00
Bently Nevada
New product
SM MARINE SERVICE™ offers the Bently Nevada 330180-50-00 Proximitor Sensor for replacement and spare-parts enquiries. This is the signal-conditioning module used within a suitable proximity transducer system. The supplied product photograph clearly shows the part number, 3300 XL 8 mm designation, metre-system identification and terminal markings. Quote the complete ordering number when requesting a price so that the required configuration can be checked accurately.
| Identification | Details |
|---|---|
| Brand | Bently Nevada |
| Part number | 330180-50-00 |
| Product family | 3300 XL 8 mm |
| Equipment type | Proximitor Sensor / proximity transducer signal conditioner |
| System length and mounting | 5.0 metre system, panel mount |
| Label scale factor | 7.87 V/mm (200 mV/mil) |
| Label supply reference | Vs (-24 VDC) |
| Field terminals | OUT, COM and Vs |
Bently Nevada 330180-50-00 Proximitor Sensor with readable product identification.
Replacing a machinery sensor requires careful identification of the complete measurement chain. A matching enclosure or similar part number is not enough to establish suitability. For this module, purchasers should check the required total system length, mounting arrangement, probe and extension cable details, and the connected monitoring channel. SM MARINE SERVICE™ accepts enquiries from vessel operators, repair companies, shipyards and industrial maintenance teams seeking the identified part.
Send clear photographs of the existing label and installation, together with the delivery destination and required quantity. These details help define the quotation and reduce the chance of ordering an unsuitable replacement. The number of units visible in a photograph is not a statement of current stock or a commitment to a particular supplied quantity.
The Proximitor module works with a compatible proximity probe and cable to produce a voltage representing the distance to a conductive target. This allows an appropriately configured system to observe shaft position or vibration. The module itself is not a complete machinery protection rack, and the separate probe is not shown as an included item in this offer.
Engineers reviewing a replacement should distinguish the signal-conditioning module from the monitoring instrument that interprets its output. A fault reported by a monitoring channel can originate elsewhere in the measurement chain. Supply selection should therefore follow identification and diagnosis rather than an assumption based only on the alarm location.
The equipment photographs are provided to show the actual exterior and labels. They do not establish an independent calibration certificate or a complete operating test. Any inspection record, warranty terms or certification required for an order should be requested and agreed before purchase.
The nominal label sensitivity is 7.87 V/mm, equivalent to 200 mV/mil. This is a displacement scale factor, not a 4–20 mA signal designation. The label identifies a negative 24 VDC supply reference. Final installation must follow the applicable manufacturer documentation and the existing monitoring circuit design; a positive 24 VDC supply must not be assumed interchangeable.
The ordering-code option 50 identifies a 5.0 metre total transducer-system configuration with panel mounting. This length concerns the compatible probe-and-extension arrangement, rather than the length of the field wiring to the monitor. Do not select a replacement solely by the visible extension cable length. Confirm the full assembly configuration against the relevant equipment documentation.
The suffix 00 identifies the agency-approval option as not required in the manufacturer's ordering information. Do not infer hazardous-area suitability from the general product-family name or a CE mark on packaging. Any required approval must be checked for the exact supplied equipment and the proposed installation.
The verified replacement module identifier for this listing is 330180-50-00. No independently orderable internal PCB identifier has been confirmed for the photographed sensor. Consequently, this listing does not advertise an invented circuit-board number or suggest that internal electronics have been opened and inspected.
For a PCB-related enquiry, provide the manufacturer's documented assembly identification and suitable photographs if available. A complete module replacement and a board-level repair are different supply requests. Suitability, service scope and supporting test information should be agreed before either approach is chosen.
The advertised item is the Proximitor Sensor module. The separate proximity probe, extension cable, monitoring rack, field enclosure and installation hardware are not automatically included. The final quotation must identify the exact items to be supplied. A group photograph is useful for showing the same part type, but does not define a four-piece sales package.
When requesting associated equipment, include the complete probe and cable ordering numbers and the installation's total system length. State whether an existing mounting base, terminal connector or other accessory is needed. Compatibility should be checked for each requested component rather than assumed from the shared product-family name.
Suitable proximity transducer systems are used in rotating-machinery measurement and maintenance. Marine and industrial buyers may require replacement modules when servicing machinery monitoring installations. The specific application, target arrangement and monitoring requirements determine whether this ordering configuration is appropriate.
For a vessel repair enquiry, identify the machinery tag, measurement point and monitor channel where possible. These references help the service engineer relate the proposed replacement to the existing installation. They do not replace the manufacturer's instructions or the responsible engineer's technical assessment.
Before replacing a suspected module, record the observed symptoms and check the available service history. Inspect accessible connectors, cable condition, terminal identification and the specified supply using approved procedures. A missing or abnormal measurement can involve the probe, extension cable, installation gap, wiring, power supply or monitor channel.
Do not change alarm limits, protection settings or wiring simply to suppress a fault indication. Machinery protection circuits require controlled maintenance procedures and appropriate isolation. Tests should be performed by qualified personnel with suitable instruments, particularly where a measurement is involved in a shutdown or protection function.
During planned maintenance, keep identification labels legible and retain a record of installed part numbers. Protect spare modules from moisture, contamination and mechanical damage. Preserve packaging and traceability documents when available. After authorised replacement, document the checks required by the equipment owner before returning the measurement channel to service.
Contact SM MARINE SERVICE™ for a quotation against 330180-50-00. Include the requested quantity, preferred condition, installation details and shipping destination. Availability, delivery arrangements and the final supply scope are confirmed individually. No stock quantity, fixed lead time or product test certificate is implied by this page.
What is the exact part number?
330180-50-00, shown on the supplied product label.
What does the 50 option identify?
A 5.0 metre system-length configuration with panel mounting.
Is this the probe itself?
No. It is the Proximitor signal-conditioning module used with a compatible probe and cable.
What is the labelled scale factor?
7.87 V/mm (200 mV/mil).
Does the photograph mean four units are included?
No. Order quantity and included items must be stated in the quotation.
Is there a verified internal PCB number?
No independently orderable internal PCB number has been confirmed for this listing.
Can a similar module be substituted?
Check the complete ordering configuration and measurement-chain compatibility first.
How do I request a quotation?
Send the part number, label photographs, quantity and destination to the company contacts below.
Bently Nevada 330180-50-00 3300 XL 8 mm Proximitor Sensor offered for marine and industrial spare-parts enquiries. The identified configuration is for a 5 metre system with panel mounting. Product labels show a nominal 7.87 V/mm scale factor and OUT, COM and negative-supply terminals. Contact SM MARINE SERVICE™ with the complete equipment identification, required quantity and shipping destination for compatibility review, availability confirmation and an itemised quotation.
SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
International buyers are welcome to request a quotation.
0
BDT 0
BDT 0
BDT 0
BDT 0
Marine Equipment Supplier