WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

Alfa Laval DS-20 Salinometer for Fresh Water Generator – New & Refurbished

Item Code:

DS-20

Brand:

Alfa Laval

Condition:

Refurbished


Alfa Laval DS-20 Salinometer for Fresh Water Generators – New & Refurbished

Product Information

Manufacturer Alfa Laval (made by Danimart Electronics, Denmark, according to supplier data)
Model Salinometer DS-20 (DS 20, DS20)
Product Type Salinometer / salinity indicator and alarm unit for fresh water generators
Front panel 0–20 ppm LED scale, ALARM indicator, ON/OFF indicators, SEC. ALARM ON/OFF key, TEST 10 PPM key, ALARM SET ↑ / ↓ keys
Known versions DS-20, DS-20 Rev. 2 (IP66), DS-20 with 4–20 mA output
Part / Serial Number Not clearly visible in the supplied photograph
Country of Manufacture Denmark (supplier data; not shown in the photograph)
Condition Available brand new and refurbished
Stock locations Bangladesh • China • Dubai (UAE) • Singapore
Supplier SM MARINE SERVICE™, Chattogram, Bangladesh

Product Introduction

The Alfa Laval DS-20 Salinometer monitors the salt content of the fresh water produced by Alfa Laval fresh water generators (evaporators) on board ships. If salinity rises above the alarm set point, it gives an alarm and can dump the bad water so that only good quality water goes to the fresh water tanks. SM MARINE SERVICE™ (https://www.smmarineservice.com/) keeps a large stock of DS-20 salinometers in both brand new and refurbished condition, with stock in Bangladesh, China, Dubai and Singapore and worldwide shipping.

What Is This Equipment?

The DS-20 is a compact electronic salinometer installed on the fresh water generator. An electrode (conductivity cell) in the distillate line measures conductivity, and the unit shows salinity in ppm on an LED bar scale from 0 to 20 ppm. The operator sets the alarm level with the ALARM SET keys, and the TEST 10 PPM key checks the alarm function. When salinity is too high, the alarm LED lights, the alarm relay operates and the dump valve / solenoid valve can return the water to the bilge or evaporator. A secondary alarm can be switched on or off with the SEC. ALARM ON/OFF key. The DS-20 is used with Alfa Laval fresh water generator types such as the JWSP-26 series and other Alfa Laval JWP / Nirex fresh water generators.

Main Features

  • Continuous salinity monitoring of fresh water generator distillate
  • LED bar display 0–20 ppm
  • Adjustable alarm set point (ALARM SET ↑ / ↓)
  • TEST 10 PPM function for alarm testing
  • Secondary alarm ON/OFF selection
  • Alarm relay for dump valve and remote alarm
  • Mains supply 90–120 V AC or 200–240 V AC (supplier data)
  • 4–20 mA output on some versions; IP66 / IK10 enclosure on Rev. 2
  • Available new and refurbished, many units in stock

Alfa Laval DS-20 salinometer fresh water generator new and refurbished - SM MARINE SERVICE stock
Alfa Laval Salinometer DS-20 units – in stock at SM MARINE SERVICE™

Main Technical Specifications

Model Alfa Laval DS-20 / DS-20 Rev. 2
Measuring display 0–20 ppm LED bar scale
Alarm Adjustable set point, alarm LED, alarm relay
Test function TEST 10 PPM
Main supply 90–120 V AC / 200–240 V AC (supplier data)
Analog output 4–20 mA (on some versions)
Enclosure IP66 / IK10 (Rev. 2, supplier data)
Sensor Salinometer electrode 9854298505
Reference seen with Rev. 2 STB202012 (supplier data; meaning Not verified)

Inside the Unit: PCBs, Modules & Part Numbers

Alfa Laval does not publish internal PCB numbers for the DS-20. The numbers below were found in supplier listings; others are listed by function and marked "Not verified".

9854298505 – Salinometer Electrode

Conductivity electrode installed in the distillate line; sends the salinity signal to the DS-20.

9843550408 – Diaphragm

Diaphragm listed together with the DS-20 electrode by a supplier (exact application: Not verified).

Main / Measuring PCB

Converts the electrode signal into ppm and controls the display and alarm. Part number: Not verified.

Front Panel / Display PCB

LED bar scale, alarm and ON/OFF indicators and keypad. Part number: Not verified.

Power Supply and Relay Section

Mains power supply and alarm relay output for the dump valve and remote alarm. Part number: Not verified.

Main Components & Related Units

  • Alfa Laval DS-20 salinometer (this unit)
  • Salinometer electrode 9854298505
  • Dump / solenoid valve for distillate
  • Alfa Laval fresh water generators: JWSP-26 series (e.g. JWSP-26-C100), JWP / Nirex series
  • Distillate pump and fresh water tank alarm

Marine & Industrial Applications

  • Fresh water generators (evaporators) on cargo ships, tankers and container ships
  • Cruise ships, ferries and offshore vessels
  • Distillate quality monitoring for boiler feed and drinking water production
  • Land-based evaporators and desalination units

Alfa Laval DS-20 salinometer front panel 0-20 ppm alarm test 10 ppm
Alfa Laval DS-20 front panel: 0–20 ppm scale, alarm, test and alarm set keys

Common Problems & Troubleshooting

  • High salinity alarm: check the fresh water generator for sea water leakage, high brine level or vacuum problems.
  • Reading always zero or wrong: check and clean the electrode 9854298505 and its cable.
  • Alarm does not operate: use TEST 10 PPM and check the alarm set point and relay.
  • No display: check the mains supply and fuses.
  • Dump valve not working: check relay output, wiring and solenoid valve.

Safety note: isolate the mains supply before opening the unit. Never send water to drinking water tanks while the salinometer is faulty or in alarm.

Maintenance Tips

  • Clean the electrode regularly to remove scale and deposits
  • Test the alarm with TEST 10 PPM at regular intervals
  • Check the alarm set point according to the fresh water generator manual
  • Keep a spare DS-20 and electrode on board

Spare Parts & Replacement Availability

SM MARINE SERVICE™ holds a large stock of Alfa Laval DS-20 salinometers, both brand new and refurbished, with stock locations in Bangladesh, China, Dubai and Singapore. For a quotation, please send the vessel name, the fresh water generator model, a photo of the existing salinometer label, the supply voltage, and the quantity. We ship worldwide.

Why This Equipment Is Still Used

The DS-20 is fitted as standard on a very large number of Alfa Laval fresh water generators. A direct replacement with the same DS-20 fits the existing panel cut-out, wiring and electrode with no modification.

FAQ

What is the Alfa Laval DS-20?
A salinometer that monitors the salinity of fresh water produced by Alfa Laval fresh water generators.

What is the measuring range?
The front panel shows a 0–20 ppm scale.

What is the part number of the DS-20 electrode?
9854298505.

What supply voltage does the DS-20 use?
90–120 V AC or 200–240 V AC according to supplier data.

Does the DS-20 have a 4–20 mA output?
Some versions have a 4–20 mA output.

What is the DS-20 Rev. 2?
A later revision with IP66 / IK10 enclosure.

Which PCBs are inside the DS-20?
A measuring / main PCB, front display PCB and power supply / relay section; PCB numbers are not verified.

Which fresh water generators use the DS-20?
Alfa Laval fresh water generators such as the JWSP-26 series and other JWP / Nirex models.

Do you have new and refurbished units?
Yes, both brand new and refurbished DS-20 units are available.

Where do you ship from?
Stock is held in Bangladesh, China, Dubai and Singapore, with worldwide shipping.

Short Product Description

The Alfa Laval DS-20 Salinometer monitors the salinity of distillate from Alfa Laval fresh water generators on ships. It shows salinity on a 0–20 ppm LED scale, has an adjustable alarm set point, TEST 10 PPM function, secondary alarm selection and alarm relay output for the dump valve. Supplier data lists 90–120 / 200–240 V AC supply, 4–20 mA output on some versions and IP66 enclosure on Rev. 2, with electrode 9854298505. SM MARINE SERVICE™ holds a large stock of brand new and refurbished DS-20 salinometers in Bangladesh, China, Dubai and Singapore, and ships worldwide.


SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China • Dubai (UAE) • Singapore

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Contact SM MARINE SERVICE™ today for a quotation on the Alfa Laval DS-20 Salinometer.


BDT:

0

-
+

Related products

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

Seres ODME MK III Oil Discharge Monitoring Equipment Control Unit

BDT 0

KONGSBERG GT404D4H25T Pressure Transmitter | GT404 25 Bar Marine Cargo Line & Manifold Pressure Sensor

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 7:55 PM
Need Help? Chat with us