EMERSON MAS 2600 Tank Contents Transmitter – Complete Marine Technical Guide

Manufacturer

Emerson Process Management Marine Tank Management Division

Country of Origin

Norway / Denmark (Marine Tank Management Division)

Product Type

Marine Tank Contents Transmitter

Marine Application

Tank Level Measurement, Cargo Tank Monitoring, Ballast Tank Monitoring, Fuel Tank Monitoring and Ship Automation Systems

---

The EMERSON MAS 2600 Tank Contents Transmitter is one of the most widely used marine tank level measurement devices installed onboard tankers, cargo vessels, offshore vessels, LNG carriers, chemical tankers, and various commercial ships.

The system provides highly accurate tank content measurement by continuously monitoring liquid levels inside tanks and transmitting the information to cargo monitoring systems, integrated automation systems, and tank management workstations.

Its reliability, accuracy, and long-term stability have made the MAS 2600 series a preferred solution throughout the marine industry.

---

Original EMERSON MAS 2600 Tank Contents Transmitter

---

Product Introduction

Modern vessels require continuous monitoring of:

• Cargo tanks
• Ballast tanks
• Fuel oil tanks
• Diesel oil tanks
• Fresh water tanks
• Sludge tanks
• Service tanks

The MAS 2600 Tank Contents Transmitter measures liquid levels and transmits accurate signals to the ship's automation and cargo management systems.

This allows officers and engineers to monitor tank conditions from centralized control stations instead of relying solely on manual sounding procedures.

---

What Is the EMERSON MAS 2600 Tank Contents Transmitter?

The MAS 2600 is an intelligent electronic transmitter designed to convert tank pressure and level information into digital measurement signals.

The transmitter continuously measures:

• Tank level
• Tank contents
• Liquid volume
• Hydrostatic pressure
• Tank status

These values are transmitted to the vessel's:

• IAS (Integrated Automation System)
• Cargo Control Room
• Engine Control Room
• Tank Monitoring Stations
• Loading Computers

---

Typical Marine Tank Monitoring System

---

Main Features

High Accuracy Measurement

Provides highly accurate tank level information even in harsh marine environments.

Digital Signal Processing

Advanced electronics ensure stable and reliable measurements.

Marine Approved Design

Designed to comply with marine classification requirements.

Long Cable Installation

Suitable for deep cargo and ballast tanks.

Corrosion Resistant Construction

Built for long-term marine service.

Low Maintenance

Requires minimal servicing throughout operational life.

Easy Integration

Compatible with modern vessel automation systems.

Reliable Continuous Monitoring

Provides real-time tank level information.

---

Main Components

The EMERSON MAS 2600 system generally consists of:

1. Pressure Sensing Element

Measures hydrostatic pressure generated by liquid inside the tank.

---

2. Electronic Transmitter Module

Processes measurement signals and converts them into usable outputs.

---

3. Long Marine Cable Assembly

Provides communication and power between transmitter and monitoring system.

---

4. Connection Interface

Allows integration with vessel automation networks.

---

5. Mounting Accessories

Supports installation inside tanks and hazardous areas.

---

Internal System Components

---

How the MAS 2600 Works

The transmitter operates using hydrostatic pressure measurement principles.

Step 1

The sensor is installed at a predetermined location inside the tank.

Step 2

The liquid column creates pressure proportional to liquid height.

Step 3

The pressure sensing element detects this pressure.

Step 4

The electronic module converts pressure into digital level information.

Step 5

The signal is transmitted to the monitoring system.

Step 6

The operator views tank levels from control stations.

---

Marine Applications

The MAS 2600 is commonly installed on:

Oil Tankers

Cargo tank level monitoring.

Chemical Tankers

Precise cargo measurement.

LNG & LPG Carriers

Tank monitoring and inventory management.

Bulk Carriers

Ballast tank monitoring.

Offshore Vessels

Storage tank supervision.

Container Vessels

Fuel and ballast tank management.

Passenger Ships

Fresh water and waste tank monitoring.

---

Shipboard Tank Installation Examples

---

Common Problems and Troubleshooting

Incorrect Tank Reading

Possible Causes

• Sensor contamination
• Calibration drift
• Damaged sensing element

Solution

• Clean sensor
• Recalibrate transmitter
• Replace faulty sensor

---

Signal Communication Failure

Possible Causes

• Broken cable
• Loose connections
• Interface fault

Solution

• Inspect wiring
• Check terminal connections
• Verify communication network

---

Unstable Tank Level Display

Possible Causes

• Electrical interference
• Sensor damage
• Power fluctuations

Solution

• Verify grounding
• Check sensor output
• Inspect power supply

---

No Output Signal

Possible Causes

• Power supply failure
• Internal electronics fault
• Wiring damage

Solution

• Check voltage supply
• Test transmitter electronics
• Repair wiring

---

Maintenance Recommendations

Weekly

• Check system alarms
• Verify displayed tank levels

Monthly

• Inspect cable condition
• Check connectors

Quarterly

• Compare manual sounding results
• Verify transmitter accuracy

Annually

• Perform complete calibration
• Inspect pressure sensing element
• Test communication signals

---

Why Ships Still Use the EMERSON MAS 2600

Despite the availability of newer technologies, many vessels continue operating with MAS 2600 transmitters because of:

• Proven reliability
• Excellent accuracy
• Long service life
• Easy maintenance
• Availability of spare parts
• Strong marine industry acceptance
• Integration with existing automation systems

Many vessels worldwide continue using these transmitters after decades of service.

---

Frequently Asked Questions (FAQ)

What does the MAS 2600 measure?

It measures tank level and liquid contents using hydrostatic pressure measurement.

Can it be used in ballast tanks?

Yes. It is widely used in ballast tanks.

Is it suitable for fuel oil tanks?

Yes. It is commonly installed in fuel oil and diesel oil tanks.

Does it require calibration?

Yes. Periodic calibration is recommended.

Can damaged transmitters be repaired?

Many units can be repaired, recalibrated, and reconditioned by qualified marine automation specialists.

---

Assembly Details

A complete EMERSON MAS 2600 Tank Contents Transmitter package generally includes:

Standard Assembly

• MAS 2600 Transmitter Unit
• Pressure Sensor Assembly
• Marine Signal Cable
• Junction Components
• Mounting Hardware
• Configuration Electronics
• Calibration Documentation
• Installation Accessories

Optional Components

• Tank Monitoring Interface
• Remote Display Unit
• Automation Integration Module
• Spare Cable Assemblies
• Calibration Kit

---

Short Product Description

The EMERSON MAS 2600 Tank Contents Transmitter is a high-accuracy marine tank level measurement device used for monitoring cargo tanks, ballast tanks, fuel tanks, and service tanks. Designed for harsh marine environments, it provides reliable level data to vessel automation and cargo management systems, ensuring safe and efficient ship operations.

SM MARINE SERVICE™

Marine Automation & Navigation Equipment Supplier

Available Condition:

• New Equipment
• Used Equipment
• Refurbished Equipment
• Reconditioned Equipment

Stock Location:

• Bangladesh
• China

Services:

• Worldwide Shipping
• Technical Support
• Spare Parts Supply
• Marine Equipment Sourcing

Contact Information

SM MARINE SERVICE™
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: www.smmarineservice.com