BMS-2000II & EMS-200II Marine Diesel Main Engine Remote Control
Item Code:
BMS-2000II & EMS-200II
Brand:
Mitsui Zosen Systems Research Inc. (MZSR)
BMS-2000II & EMS-200II Marine Diesel Main Engine Remote Control Device
Manufacturer
Mitsui Zosen Systems Research Inc. (MZSR)
Country of Origin
Japan
Product Type
Marine Main Engine Remote Control & Engine Management System
Marine Application
Bridge Control, Main Engine Maneuvering, Propulsion Control & Engine Automation
Product Introduction
The BMS-2000II & EMS-200II Marine Diesel Main Engine Remote Control Device is an advanced Japanese marine automation system designed to provide safe, reliable, and efficient control of a vessel's main propulsion engine directly from the bridge and engine control room.
The system integrates propulsion commands, maneuvering controls, engine monitoring, alarm management, speed control, and safety protection functions into a centralized control platform.
Widely installed on cargo ships, tankers, bulk carriers, container vessels, and offshore vessels, the BMS-2000II series enables operators to manage engine operations with high accuracy while reducing manual intervention.
Main Product Image
The image above shows an actual BMS-2000II & EMS-200II Main Engine Remote Control Display Unit supplied by SM MARINE SERVICE™.
What Is the BMS-2000II & EMS-200II System?
The BMS-2000II is a sophisticated propulsion automation platform that allows remote operation of the ship's main engine from the navigation bridge.
The system performs multiple functions:
- Engine start and stop control
- Ahead and astern maneuvering
- Speed regulation
- Fuel control
- Safety shutdown monitoring
- Slowdown request handling
- Alarm management
- Bridge and engine room control transfer
It acts as the communication link between the ship's bridge and the propulsion machinery.
Marine Engine Control System Images
Working Principle
The BMS-2000II continuously exchanges signals between bridge controls, engine control systems, and propulsion machinery.
Operating Sequence
- Bridge operator selects maneuvering command.
- Command is transmitted to EMS-200II control system.
- Engine parameters are verified.
- Safety interlocks are checked.
- Engine receives speed and direction commands.
- System monitors engine response.
- Alarms and protection systems remain active throughout operation.
This closed-loop control ensures safe propulsion management.
Main Features
Remote Main Engine Control
Full engine maneuvering from the bridge.
Engine Start / Stop Function
Safe and controlled engine operation.
Ahead / Astern Control
Accurate propulsion direction management.
Speed Control
Automatic engine speed regulation.
Safety Shutdown System
Protects machinery from severe damage.
Slowdown Request Function
Prevents catastrophic engine failures.
Alarm Management
Displays operational and fault alarms.
Integrated Monitoring
Provides real-time engine status information.
Additional System Images
Main Components
1. BMS-2000II Display Unit
The operator interface and alarm display system.
Functions
- Alarm monitoring
- System status display
- Operational commands
2. EMS-200II Engine Management Unit
The main processing and control module.
Functions
- Engine control logic
- Signal processing
- Safety management
3. Bridge Control Interface
Allows navigation officers to control propulsion.
Functions
- Speed commands
- Direction commands
- Start/stop commands
4. Engine Room Interface
Provides local engine control capability.
Functions
- Local operation
- Maintenance control
5. Safety Protection System
Protects propulsion machinery.
Functions
- Shutdown commands
- Slowdown commands
- Interlock monitoring
6. Communication Network
Links all propulsion control modules.
Functions
- Data transfer
- Status monitoring
Major Alarm Functions
The displayed image shows several alarm categories.
SYSTEM FAILURE
Indicates critical control system faults.
SHUT DOWN
Activated during severe engine protection events.
SLOW DOWN REQUEST
Requests engine speed reduction.
SPEED LIMIT
Limits engine RPM to safe operating values.
IMPERFECT CONDITION
Indicates abnormal propulsion conditions.
IMPOSSIBLE START
Engine start conditions not satisfied.
START AIR LOW PRESSURE
Insufficient starting air pressure.
FUEL CAM ABNORMAL
Fuel control mechanism malfunction.
CRITICAL SPEED
Engine operating near restricted RPM range.
Control & Monitoring Images
Marine Applications
The BMS-2000II & EMS-200II are commonly installed on:
Bulk Carriers
Container Ships
- Bridge maneuvering systems
Oil Tankers
Chemical Tankers
LNG/LPG Carriers
- Engine control integration
Offshore Vessels
- Dynamic propulsion management
Common Problems & Troubleshooting
System Failure Alarm
Possible Causes
- Processor fault
- Power supply issue
- Communication failure
Corrective Actions
- Check system power
- Inspect communication modules
- Verify controller status
Impossible Start Alarm
Possible Causes
- Safety interlock active
- Starting air unavailable
- Engine conditions not satisfied
Corrective Actions
- Verify start permissives
- Check air pressure
- Inspect interlock logic
Fuel Cam Abnormal Alarm
Possible Causes
- Actuator malfunction
- Position sensor fault
- Fuel linkage problem
Corrective Actions
- Inspect actuator
- Check feedback signals
- Verify mechanical linkage
Slow Down Request
Possible Causes
- High exhaust temperature
- Lubrication problem
- Cooling system issue
Corrective Actions
- Identify triggering parameter
- Correct abnormal condition
- Reset system after verification
Communication Failure
Possible Causes
- Network issue
- Controller failure
- Cable damage
Corrective Actions
- Check communication cables
- Verify interface modules
- Test network integrity
Maintenance Tips
Daily Checks
- Verify alarm status
- Check display operation
Weekly Checks
- Test command functions
- Verify communication links
Monthly Checks
- Backup system settings
- Inspect terminals and wiring
Quarterly Maintenance
- Verify control logic
- Test protection functions
Annual Maintenance
- Complete system testing
- Communication verification
- Alarm simulation tests
- Software parameter review
Maintenance & Service Images
Why Ships Still Use BMS-2000II & EMS-200II
The BMS-2000II platform remains popular because:
- Proven Japanese reliability
- Stable propulsion control
- Excellent alarm management
- Long operational lifespan
- Easy integration with marine engines
- Strong safety architecture
- Worldwide acceptance in commercial fleets
Many vessels continue operating these systems successfully after decades of service.
Frequently Asked Questions (FAQ)
What is the primary purpose of the BMS-2000II?
It provides remote control and monitoring of the ship's main propulsion engine.
Can the system start and stop the main engine?
Yes. The system includes engine start, stop, and maneuvering functions.
What is EMS-200II?
EMS-200II is the Engine Management System that processes control and protection logic.
Can the system trigger engine slowdown?
Yes. Slowdown requests are generated when abnormal operating conditions are detected.
Is the system suitable for bridge control?
Yes. It is specifically designed for bridge maneuvering and propulsion control.
Short Product Description
The BMS-2000II & EMS-200II Marine Diesel Main Engine Remote Control Device is a Japanese-engineered propulsion automation system designed for remote operation, monitoring, and protection of marine diesel main engines. Featuring advanced maneuvering control, alarm management, safety shutdown functions, and integrated engine monitoring, it remains a trusted solution for commercial vessel propulsion control worldwide.
Assembly Details
Complete BMS-2000II & EMS-200II Assembly Includes
1. Operator Display Unit
- LCD display
- Alarm indicators
- Control keys
2. EMS-200II Control Processor
- Engine management logic
- Signal processing module
3. Bridge Control Interface
- Maneuvering command input
- Speed control interface
4. Engine Room Control Unit
- Local operation controls
- Backup operation system
5. Alarm Management Module
- Shutdown alarms
- Slowdown alarms
- Warning alarms
6. Communication Network Module
- Data communication
- Interface control
7. Safety Protection Module
- Engine protection logic
- Interlock monitoring
8. Terminal & Wiring Assembly
- Power connections
- Signal interfaces
- Communication terminals
SM MARINE SERVICE™
Marine Automation & Navigation Equipment Supplier
Available Condition:
• New Equipment
• Used Equipment
• Refurbished Equipment
• Reconditioned Equipment
Stock Location:
• Bangladesh
• China
Services:
• Worldwide Shipping
• Technical Support
• Spare Parts Supply
• Marine Equipment Sourcing
Contact Information
SM MARINE SERVICE™
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: www.smmarineservice.com
