WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image
Product Image
Product Image

Sasakura Engineering SK 101 Salinity Indicator – Fresh Water Generator Salinometer (Refurbished)

Item Code:

SK 101

Brand:

SASAKURA ENGINEERING

Condition:

Refurbished


Sasakura Engineering SK 101 Salinity Indicator – Fresh Water Generator Salinometer (Refurbished)

Product Information

Product Name Salinity Indicator (Salinometer)
Manufacturer SASAKURA ENGINEERING CO., LTD., Japan
Model SK 101 (SK101)
Display Red LED digital display in ppm
Indicators POWER (green), ALARM, ALARM CUT (amber)
Controls TEST SW (5 ppm), POWER SW, ALARM VALUE, ALARM CUT push buttons; ALARM ADJUST knob
Labels Japanese / English warning: HIGH VOLTAGE – DO NOT OPEN DOOR
Serial Number / Power Rating Not clearly visible in the supplied photograph
Mounting Wall-mounted steel box with bottom cable entry
Country of Manufacture Japan
Condition Refurbished / Used
Supplier SM MARINE SERVICE™ – worldwide shipping

Product Introduction

The Sasakura Engineering SK 101 Salinity Indicator is the salinometer that monitors the salt content of the fresh water (distillate) produced by Sasakura fresh water generators on ships. It shows the salinity in ppm and gives an alarm when the water quality goes above the set limit, so that salty water is not sent to the fresh water tank. SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies refurbished Sasakura salinity indicators and fresh water generator spares worldwide.

What Is This Equipment?

Sasakura Engineering is a leading Japanese maker of marine and land desalination plants; its K series fresh water generators for diesel ships have been built since 1961, followed by the Aquario plate type. These generators evaporate sea water under vacuum using engine jacket cooling water heat. Because pure water hardly conducts electricity, a salinometer measures the conductivity of the distillate: more current means more salt. The SK 101 is the indicator unit that reads the salinity cell (electrode) in the distillate line, displays the ppm value and operates the alarm and, where fitted, the dump/solenoid valve.

Main Features

  • Digital LED display of salinity in ppm
  • Adjustable alarm set point (ALARM ADJUST) with ALARM VALUE display button
  • TEST SW to simulate 5 ppm and check the alarm circuit
  • ALARM CUT button and indicator to silence the alarm
  • POWER switch and POWER lamp
  • Alarm output for remote alarm / dump valve
  • Compact wall-mount steel enclosure

Sasakura Engineering SK 101 salinity indicator salinometer fresh water generator refurbished - SM MARINE SERVICE
Sasakura SK 101 Salinity Indicator with ppm display, TEST SW (5 ppm), ALARM VALUE and ALARM CUT – SM MARINE SERVICE™ photo

Main Technical Specifications

Model SK 101
Measured Value Salinity of distillate, ppm
Measuring Principle Electrical conductivity via salinity cell
Display 3-digit red LED, ppm
Test Function 5 ppm test switch
Alarm Adjustable set point, alarm lamp, alarm cut
Supply Voltage Not clearly visible in the supplied photograph
Application Sasakura marine fresh water generators

Inside the Unit: PCBs, Modules & Part Numbers

The SK 101 indicator and its system parts are available as below. Send us your label photo and we will supply the matching item.

SK 101 Main Measuring / Control PCB

Amplifies the salinity cell signal, compares it with the alarm set point and drives the alarm relay.

LED Display Board

3-digit ppm display with POWER, ALARM and ALARM CUT lamps.

Power Supply Section

Internal transformer and power supply (high voltage inside – do not open the door while energized).

Alarm Relay Output

Volt-free alarm contact for the engine room alarm system and dump valve control.

Salinity Cell (Sensor) – Sasakura R11/4 type

Conductivity electrode mounted in the distillate pipe and wired to the SK 101.

Main Components & Related Units

  • Salinity cell / electrode in the distillate line (Sasakura R11/4 type)
  • Solenoid / dump valve returning high-salinity water to the evaporator
  • Distillate pump, ejector pump and water meter of the fresh water generator
  • Sasakura fresh water generators: K series, Aquario plate type, V-100TE, X series (XE10)

Marine & Industrial Applications

  • Fresh water generators (evaporators) on all kinds of ships
  • Boiler feed water quality monitoring
  • Drinking and technical water production on offshore units
  • Land-based desalination plants

Sasakura SK101 salinometer salinity alarm ppm marine FWG spare part - SM MARINE SERVICE worldwide
Front panel of the SK 101 with ALARM ADJUST knob and push buttons

Common Problems & Troubleshooting

Safety note: The unit carries high voltage inside – switch off and isolate before opening the door. Do not bypass the salinity alarm; salty water can damage boilers and is unsafe to drink.

  • High salinity reading – check the fresh water generator (sea water leakage, priming, vacuum) before suspecting the indicator.
  • Reading stays at zero – check salinity cell cable, connections and that the cell is immersed in flowing distillate.
  • Unstable reading – dirty or scaled electrode; clean the salinity cell.
  • Alarm does not operate – use TEST SW (5 ppm) and check the alarm set point with ALARM VALUE.
  • Display dark – check POWER SW, supply and fuse.

Maintenance Tips

  • Test the alarm regularly with the TEST SW
  • Clean the salinity cell electrode periodically
  • Check the alarm set point matches the ship's requirement
  • Check cable glands and keep the box dry
  • Verify the reading against a portable salinity tester

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies refurbished Sasakura SK 101 salinity indicators and can source salinity cells and fresh water generator spares. For a fast quotation please send:

  • Photo of the indicator and its rating label
  • Fresh water generator model
  • Salinity cell type
  • Vessel name and delivery port

We ship worldwide.

Why This Equipment Is Still Used

Sasakura fresh water generators are installed on a very large number of ships worldwide. The SK 101 fits the original cell, wiring and panel cut-out, so a like-for-like unit is the fastest way to restore salinity monitoring.

FAQ

1. What does the Sasakura SK 101 do?
It measures and displays the salinity of fresh water from the fresh water generator and gives an alarm when it is too high.

2. What unit does it display?
Salinity in ppm.

3. What is the TEST SW (5 ppm)?
A test button that simulates 5 ppm to check the display and alarm.

4. How do I set the alarm value?
Press ALARM VALUE to show the set point and turn ALARM ADJUST to change it.

5. Which sensor is used?
A Sasakura salinity cell (electrode) in the distillate line, such as the R11/4 type.

6. Do you supply the SK 101 PCB?
Send us a photo of the board and we will check.

7. Why is the salinity alarm on?
Usually salt carry-over or leakage in the fresh water generator; check the plant first.

8. Can it be used with Sasakura Aquario or K series?
Sasakura salinity indicators are used with Sasakura fresh water generators; confirm with your plant drawing.

9. Is this unit new?
No, it is refurbished / used.

10. Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide.

Short Product Description

Refurbished Sasakura Engineering SK 101 Salinity Indicator, supplied by SM MARINE SERVICE™. This Japanese salinometer monitors the salinity of distillate from marine fresh water generators and shows it in ppm on a red LED display. It has a POWER switch and lamp, a 5 ppm TEST switch, ALARM VALUE and ALARM CUT buttons, an ALARM ADJUST knob and an alarm lamp, all in a compact wall-mounted steel box. It works with a salinity cell in the distillate line and gives an alarm output for remote alarm or dump valve control. Salinity cells and other Sasakura fresh water generator spares can also be sourced. Worldwide shipping.

SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/

Need a Sasakura SK 101 salinity indicator? Send us your label photo today for a fast quotation.


Related products

Deckma OMD-21 Oil Content Meter | 15 PPM Bilge Alarm

BDT 0

BRANNSTROM CLEANTRACK 1000B Oil Discharge Monitoring and Control System (ODME)

BDT 0

Saginomiya SNS-C106X60 Pressure Control Switch – Marine Refrigeration, HVAC & Compressor Protection Control

BDT 0

BD-Sensors

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 4:47 AM
Need Help? Chat with us