Salwico Gas Detection System
Consilium Salwico
Refurbished
| Product Name | E/R Gas Detection Control Panel (Catalytic Combustion Type) |
| Manufacturer / System | Consilium – Salwico Gas Detection System (Sweden) |
| Panel Label | E/R GAS DETECTION CONTROL PANEL (CATALYTIC COMBUSTION TYPE) |
| Controller Family | Salwico CGD50 gas detection central – available in several versions (see part numbers below) |
| Front Controller | Display with arrow keys; POWER, DIMMER, GAS ALARM, SYSTEM FAULT indicators; MUTE and RESET buttons |
| Detection Principle | Catalytic combustion (catalytic bead / pellistor) for flammable hydrocarbon gases, % LEL |
| Enclosure | Wall-mounted steel cabinet with two key locks, 7 cable glands at the bottom |
| Application | Engine room (E/R) flammable gas detection on ships |
| Condition | Refurbished / Used |
| Supplier | SM MARINE SERVICE™ – worldwide shipping |
The Consilium Salwico E/R Gas Detection Control Panel (Catalytic Combustion Type) is the central alarm and control cabinet that monitors flammable gas detectors in a ship's engine room. It shows gas levels, gives gas alarms and system fault alarms, and drives relays for alarms and safety actions. SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies refurbished Salwico gas detection panels, controllers and detectors to ship owners, ship managers and yards worldwide.
Consilium has offered Salwico gas detection on ships since 1959, with both sampling systems and point detection systems. This panel is a point detection type: catalytic combustion gas detectors are installed in the engine room and wired to the panel. The catalytic sensor has a detection element and a reference element in a Wheatstone bridge; flammable gas burning on the hot element changes the signal, which the panel converts into a % LEL reading and alarms. The Salwico CGD50 central is a gas detection control system for small stationary installations monitoring explosive and/or toxic gases and oxygen, delivered with an internal control panel, RS485 interface (NMEA 0183, Modbus RTU), relay outputs and 4–20 mA detector inputs.

Consilium Salwico E/R Gas Detection Control Panel (Catalytic Combustion Type) – refurbished, SM MARINE SERVICE™ photo
| System | Consilium Salwico Gas Detection System |
| Panel Type | E/R gas detection control panel, catalytic combustion type |
| Central | Salwico CGD50 gas detection control system |
| Detector Inputs | 4–12 × 4–20 mA (depending on version) |
| Relay Outputs | 5–15 (one fault, one gas A1, others programmable) |
| Serial Interface | Isolated RS485 – NMEA 0183, Modbus RTU |
| Typical Detector Supply | 24 V DC nominal (Salwico GD: 16–32 V DC) |
| Gas Measured | Flammable hydrocarbon gases, 0–100 % LEL |
| Mounting | Wall mounted, lockable door, bottom cable glands |
The Salwico CGD50 central and its modules are available in the following versions. Send us the part number from your panel and we will supply the matching one.
Central with 4 × 4–20 mA inputs and 3 configurable relay outputs, RS485.
Central with 4 × 4–20 mA inputs and 11 configurable relay outputs.
Central with 8 × 4–20 mA inputs and 3 configurable relay outputs.
Central with 8 × 4–20 mA inputs, 5 relay outputs, RS485 and RS485/RS422.
Central with 4 × 4–20 mA inputs, 13 relays, digital inputs and outputs (8 DI / 8 DO).
Front operator panel with display, arrow keys, POWER/DIMMER, GAS ALARM, SYSTEM FAULT, MUTE and RESET.
System module for CGD50/500 centrals.
Digital input module for CGD50/500 and CGS50/500.
| Salwico GD CAT HC – catalytic hydrocarbon detector, 0–100 % LEL | 5200260-01A |
| Salwico GD CAT HC spare sensor cartridge | 5200260-11A |
| Salwico GD NDIR CH4 (methane) | 5200260-02A |
| Salwico GD NDIR C3H8 (propane) | 5200260-03A |
| Salwico GD EC O2 (oxygen) | 5200261-01A |
| Salwico GD EC CO (carbon monoxide) | 5200262-02A |
| BUCOM ST600EX catalytic gas detector | 4460 |
| ST350EX gas detector (CGD50 / CGD500 Touch) | 1226030–1227540 |
| Salwico KVD gas detector | 3242 |
| Salwico GD10 IR detector (propane / CO2) | 4253 / 4250 |

Front controller with display, GAS ALARM / SYSTEM FAULT indicators, MUTE and RESET – available from SM MARINE SERVICE™
Safety note: Gas detection is a safety system. Inform the bridge/engine control room before testing or isolating. Never work on detectors in a hazardous area without a gas-free permit. Use certified calibration gas only.
SM MARINE SERVICE™ supplies refurbished Salwico gas detection panels and can source centrals, modules, detectors and sensor cartridges. For a fast quotation please send:
We ship worldwide.
Catalytic combustion detection is a proven, low-cost method for flammable gas monitoring, and many ships have Salwico panels installed since new build. A like-for-like replacement keeps existing detectors, cabling and class approval in place.
1. What is this panel used for?
It monitors flammable gas detectors in the engine room and gives gas and fault alarms.
2. What does "catalytic combustion type" mean?
The detectors use catalytic bead sensors that measure flammable gas in % LEL.
3. Which Salwico central is used?
Salwico CGD50 gas detection central; versions 5101112-00A, 5101131-00A, 5101132-00A, 5101133-00A and 5101130-00A are available.
4. What is part number 5200260-01A?
Salwico GD CAT HC catalytic hydrocarbon gas detector, 0–100 % LEL.
5. What is 5200260-11A?
The spare catalytic sensor cartridge for the Salwico GD CAT HC.
6. What is CM-DI70-G 5100074?
A digital input module for CGD50/500 systems.
7. Can the panel send data to the ship alarm system?
Yes, via relays and the RS485 interface (NMEA 0183 / Modbus RTU).
8. Why is the SYSTEM FAULT lamp on?
Usually a detector loop, cable or power problem; check the fault text on the display.
9. Do you supply ST600EX or ST350EX detectors?
Send us the part number and we will quote.
10. Is this unit new?
No, it is refurbished / used.
11. Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide.
Refurbished Consilium Salwico E/R Gas Detection Control Panel, catalytic combustion type, supplied by SM MARINE SERVICE™. This wall-mounted, lockable cabinet holds the Salwico gas detection controller with display, arrow keys, POWER/DIMMER, GAS ALARM and SYSTEM FAULT indicators and MUTE/RESET buttons, with seven cable glands for detector and alarm wiring. It monitors catalytic flammable gas detectors in the engine room and provides alarm relays and RS485 communication. Salwico CGD50 central versions, modules, catalytic detectors and spare sensor cartridges are also available. Worldwide shipping.
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
Need a Salwico gas detection panel, detector or module? Send us your part number today for a fast quotation.
Marine Equipment Supplier