EMI-103 K/787/13-002A
Terasaki
New product
| Manufacturer | TERASAKI (Terasaki Electric Co., Ltd.) |
| Model / Card Name | EMI-103 |
| Board / Part Number | K/787/13-002A |
| Product Type | Central PCB card (plug-in control card with front panel) |
| Front Panel Markings | CENTRAL, ICU ABNOR. (red LED), INIT. SW (push button), LOADER CONNECT. (multi-pin connector), EMI-103 |
| Other Numbers Printed on PCB | 23, 95071 |
| Program Memory (EPROM) Label | LC-A 106 on Fujitsu MBM2764-25 EPROM (marked "JAPAN", "9251 W12 AB") |
| Serial Number | Not clearly visible in the supplied photograph |
| Country of Manufacture | Japan (components marked JAPAN; Terasaki is a Japanese manufacturer) |
| Condition | New |
| Supplier | SM MARINE SERVICE™, Chattogram, Bangladesh |
The Terasaki EMI-103 (K/787/13-002A) is a plug-in central control PCB card used in Terasaki marine control and monitoring equipment. The card carries a program EPROM labelled LC-A 106, CMOS logic ICs and a front panel with a CENTRAL marking, an ICU ABNOR. abnormal-status LED, an INIT. SW initialise switch and a LOADER CONNECT. port. SM MARINE SERVICE™ supplies this card as a refurbished replacement for ship owners, ship managers, superintendents and marine electricians worldwide. Visit https://www.smmarineservice.com/ for more marine automation and navigation spare parts.
EMI-103 is a rack-mounted printed circuit board from the Terasaki EMI card series. Based on its front panel, it acts as the central card of an ICU (the abbreviation shown on the faceplate) inside a Terasaki control panel: it holds the stored program (EPROM LC-A 106), reports an abnormal ICU condition through the red LED, can be re-initialised with the INIT. switch, and offers a loader connector for programming or data transfer. The card plugs into a back-plane through a gold-plated edge connector and is fixed with two front-panel handles/screws.
The exact name of the Terasaki system in which EMI-103 is installed was not verified from manufacturer documentation. Terasaki cards of this family are widely used in shipboard switchboard, generator control and power management panels.
Terasaki EMI-103 central PCB card, part number K/787/13-002A, with EPROM LC-A 106 – SM MARINE SERVICE™
| Model | EMI-103 |
| Part Number | K/787/13-002A (a K/787/13-002B revision is also seen in the market – check before ordering) |
| Function | Central / CPU-type control card for Terasaki ICU |
| Program Memory | EPROM Fujitsu MBM2764-25, label LC-A 106 |
| Logic | CMOS logic (Toshiba TC4000-series ICs) |
| Front Panel | ICU ABNOR. LED, INIT. SW, LOADER CONNECT. connector |
| Mounting | Plug-in rack card with edge connector |
| Supply Voltage | Not verified (supplied from the system back-plane) |
| Dimensions / Weight | Not verified |
The following numbers were read from the supplied photographs. They help buyers search and match the exact board.
The main board itself. Carries the program memory, logic circuits, ICU abnormal LED, initialise switch and loader connector.
Fujitsu MBM2764-25 EPROM with the label LC-A 106 holds the card software. When replacing the card, compare the EPROM label with your old card – a different software label may behave differently in your system.
Decoder, monostable multivibrator and addressable latch ICs used for the card's logic functions (numbers read from the photograph).
Numbers printed on the PCB surface; their meaning is not verified.
Other Terasaki EMI-series cards seen in the spare-parts market (numbers from market listings, not verified against Terasaki documentation and not confirmed to be from the same rack):
SM MARINE SERVICE™ also sources other Terasaki PCB cards for switchboards, ACB control and generator/power management panels – send us the card name and K-number.
Front panel of Terasaki EMI-103: CENTRAL, ICU ABNOR. LED, INIT. SW and LOADER CONNECT. – SM MARINE SERVICE™
Safety notes: switch off and isolate the panel before removing or inserting cards, use ESD protection (wrist strap), follow the ship's permit-to-work system and the Terasaki manual. Work on switchboard equipment should only be done by qualified personnel.
SM MARINE SERVICE™ supplies Terasaki EMI-103 and other Terasaki PCB cards in refurbished, used and new condition, subject to confirmation. For a fast quotation please send:
We ship worldwide by DHL, FedEx, UPS and other couriers, and can deliver to ships through agents in major ports.
Many vessels built in the 1990s and 2000s still operate Terasaki control panels with EMI-series cards. Replacing a complete panel is expensive and needs class approval, so ship owners prefer to replace a single faulty card. Reliable supply of tested cards such as EMI-103 keeps these systems running safely and at low cost.
Q1. What is Terasaki EMI-103?
It is a central PCB card (part number K/787/13-002A) used in Terasaki marine control equipment, with ICU abnormal LED, initialise switch and loader connector.
Q2. What is the part number of the EMI-103 card?
The card in our photos is K/787/13-002A. A K/787/13-002B revision also exists.
Q3. Are K/787/13-002A and K/787/13-002B interchangeable?
Not verified. Please send your card details and we will check before supply.
Q4. What is LC-A 106 on the card?
It is the label on the program EPROM (Fujitsu MBM2764-25) that holds the card software.
Q5. What does the ICU ABNOR. LED mean?
It indicates an abnormal condition of the ICU. Refer to your Terasaki manual for the exact meaning in your system.
Q6. What is the INIT. SW used for?
It is an initialise switch used to reset/initialise the unit.
Q7. Which other Terasaki EMI cards can you supply?
We can source cards such as EMI-201, EMI-501 (K/787/17-001A) and EMI-502 (K/787/18-001B), subject to availability.
Q8. Is the card tested?
Refurbished cards are inspected and cleaned before supply. Testing details are confirmed with each quotation.
Q9. Can you repair my faulty EMI-103 card?
Contact us with photos and fault description; we will advise on repair or replacement.
Q10. Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide from Bangladesh and China stock locations.
Q11. How do I get a price?
Send the card name, K-number, EPROM label and quantity to info@smmarineservice.com or WhatsApp +88 01818 929292.
Terasaki EMI-103 (K/787/13-002A) is a Japanese-made central PCB card for Terasaki marine control equipment. It carries the LC-A 106 program EPROM (Fujitsu MBM2764-25), Toshiba CMOS logic ICs and a front panel with CENTRAL marking, ICU ABNOR. LED, INIT. SW initialise switch and LOADER CONNECT. port. The card plugs into the control rack through a gold-plated edge connector. SM MARINE SERVICE™ supplies this card in refurbished condition as a replacement spare part for ships, offshore units and industrial plants worldwide. Send us your card number and EPROM label for a fast quotation and worldwide delivery.
Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)
Stock Locations: Bangladesh • China
Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: https://www.smmarineservice.com/
Need a Terasaki EMI-103 card or any other Terasaki PCB? Contact SM MARINE SERVICE™ today for a quick quotation.
0
BDT 0
BDT 0
BDT 0
BDT 0
Marine Equipment Supplier