WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
WhatsApp : +88 01818929292 / +8801730296909
info@smmarineservice.com sohelbhuiyan1213@gmail.com
Product Image Product Image Product Image
Product Image
Product Image
Product Image

Tokyo Keiki (Tokimec) TG-6000 Gyrocompass – Master Compass & Control Unit (GX162W4SF)

Item Code:

TG-6000 / GX162W4SF

Brand:

TOKYO KEIKI (TOKIMEC)

Condition:

Refurbished


TOKYO KEIKI (TOKIMEC) TG-6000 Gyrocompass – Master Compass & Control Unit (GX162W4SF)

Product Information

Manufacturer TOKYO KEIKI INC. (formerly TOKIMEC), Japan
Model GYRO-COMPASS TG-6000
Product type Marine gyrocompass system – master compass and control unit
Label on gyro assembly MADE IN JAPAN TOKYO KEIKI – GX162W4SF (barcode label)
Other marking "102209094 TOKYO KEIKI" printed on the flexible circuit (meaning Not verified)
Control panel TG-6000 operation panel with POWER ON/OFF, status LEDs, display, SET / < / > / ENT / CLR keys, DIM and ALARM ACK
Serial number / power rating Not clearly visible in the supplied photograph
Country of manufacture Japan
Condition Refurbished (subject to confirmation)

Product Introduction

The Tokyo Keiki (Tokimec) TG-6000 Gyrocompass is a compact marine gyrocompass that gives ships an accurate true-north heading for steering, radar, ECDIS, autopilot and other bridge equipment. The system consists of a master compass and a control unit; this set shows the master compass with its heading card, the control electronics chassis and the TG-6000 operation panel. The gyro assembly carries the label GX162W4SF.

SM MARINE SERVICE™ (https://www.smmarineservice.com/) supplies TG-6000 gyrocompass units, gyro assemblies and PCBs to ships worldwide.

What Is This Equipment?

A gyrocompass uses a fast-spinning gyroscope that settles on the earth's true meridian, so it is not affected by magnetism like a magnetic compass. In the TG-6000 the sensitive element inside the master compass senses true north; the control unit supplies power, controls the follow-up system and sends heading data (NMEA 0183 compatible) to repeaters, autopilot, radar, ECDIS, AIS and VDR. The operation panel shows status and alarms and allows settings such as speed and latitude correction.

Main Features

  • Two-unit system: master compass and control unit (compact design)
  • NMEA 0183 heading output, compatible with Integrated Bridge Systems
  • Conforms to IMO performance standards (manufacturer/distributor information)
  • Low power consumption and long-life design
  • Operation panel with status LEDs, display, keypad, dimmer and ALARM ACK
  • Large heading card visible through the master compass window

Tokyo Keiki Tokimec TG-6000 gyrocompass master compass and control unit with operation panel - SM MARINE SERVICE
Tokyo Keiki (Tokimec) TG-6000 gyrocompass – control electronics with operation panel (left) and master compass (right)

Main Technical Specifications

Type Marine gyrocompass
Units Master compass, control unit, operation panel
Heading output NMEA 0183 compatible (plus repeater outputs)
Standards IMO performance standards (as stated by distributors)
Accuracy / settling time / power Not verified – please refer to the vessel's TG-6000 manual
Gyro assembly label GX162W4SF

Inside the Unit: PCBs, Modules & Part Numbers

Gyro Assembly – GX162W4SF

Tokyo Keiki label on the gyro assembly in the master compass (barcode label, "Made in Japan Tokyo Keiki"). Exact part description: Not verified.

Control Unit – 101691164

TG-6000 control unit reference listed by spare-parts suppliers (Not verified against this set).

TG-6000 / DGM-60 PCB – 101695075

PCB/PWB listed for TG-6000 and DGM-60 (Not verified against this set).

Inverter Assy – 10169109

Inverter assembly that powers the gyro motor, listed for TG-6000.

Brush Assy – 102393794 / 102393804

Brush assemblies for TG-6000 / TG-8000 (ordered as a pair).

Control Electronics Chassis

Main board with terminal blocks and relays, power supply board with transformers and capacitors, interface board and wiring harness, as seen in the photo. Board numbers: Not clearly visible in the supplied photograph.

Main Components & Related Units

  • TG-6000 Master Compass – contains the sensitive element / gyro assembly and follow-up system
  • TG-6000 Control Unit (101691164) – power, control and outputs
  • TG-6000 Operation Panel – display, keys and alarm acknowledgement
  • Heading repeaters and distribution to autopilot, radar, ECDIS, AIS and VDR
  • Related Tokyo Keiki gyros: TG-8000, TG-8500, TG-5000

Marine & Industrial Applications

  • Main or backup gyrocompass on cargo ships, tankers, bulk carriers and offshore vessels
  • Heading source for autopilot, radar/ARPA, ECDIS, AIS and VDR
  • Replacement of a failed TG-6000 master compass, control unit or PCB

Tokyo Keiki TG-6000 gyro assembly label GX162W4SF Made in Japan
Gyro assembly label inside the master compass: MADE IN JAPAN TOKYO KEIKI – GX162W4SF

Common Problems & Troubleshooting

Safety: the gyrocompass feeds heading to the autopilot and radar. Switch the autopilot to hand steering and inform the bridge before switching off. Isolate power before opening units; the gyro needs settling time after restart. Handle the sensitive element only as described in the manufacturer's manual.

  • Heading error or drift: check speed and latitude settings and the settling time after start-up.
  • Alarm on the operation panel: check the alarm item shown, the power supply and the inverter.
  • Repeaters not following: check repeater outputs, fuses and wiring.
  • No NMEA output: check the interface board and cable to the receiving equipment.
  • Noisy follow-up: check brushes and slip ring (brush assy 102393794 / 102393804).

Maintenance Tips

  • Follow the recommended service interval for the sensitive element
  • Check and replace worn brush assemblies
  • Keep the master compass clean and well ventilated
  • Compare gyro heading with other heading sources regularly
  • Keep spare PCBs and an inverter assy for critical ships

Spare Parts & Replacement Availability

SM MARINE SERVICE™ supplies Tokyo Keiki / Tokimec TG-6000 master compasses, control units, gyro assemblies, inverters, brush assemblies and PCBs. For a quotation, please send:

  • Photos of the unit labels and the gyro assembly label (e.g. GX162W4SF)
  • Board labels if only a PCB is needed
  • Fault or alarm description
  • Vessel name, port and required delivery date

We ship worldwide, subject to availability confirmation.

Why This Equipment Is Still Used

The TG-6000 has been fitted on many merchant ships and remains in service. Replacing a complete gyrocompass means new installation and re-connecting all bridge equipment, so owners keep it working with tested replacement units and spare parts.

FAQ

What is the Tokyo Keiki TG-6000?
A marine gyrocompass made by Tokyo Keiki (formerly Tokimec), consisting of a master compass and control unit.

Is Tokimec the same as Tokyo Keiki?
Yes, Tokimec is the former name of Tokyo Keiki.

What is GX162W4SF?
It is the label on the gyro assembly inside this TG-6000 master compass.

What is part number 101691164?
A TG-6000 control unit reference listed by spare-parts suppliers.

What is 101695075?
A PCB/PWB listed for TG-6000 and DGM-60.

What is 10169109?
The TG-6000 inverter assembly.

Which brush assemblies fit the TG-6000?
102393794 and 102393804, ordered together.

What output does the TG-6000 give?
NMEA 0183-compatible heading data plus repeater outputs.

Can you supply only a PCB?
Yes, send us the board label photo and we will check availability.

Do you ship worldwide?
Yes, SM MARINE SERVICE™ ships worldwide from Bangladesh and China.

Short Product Description

Tokyo Keiki (Tokimec) TG-6000 marine gyrocompass with master compass and control unit. The set includes the master compass with heading card, the control electronics chassis with power supply and interface boards, and the TG-6000 operation panel with status LEDs, display, keypad, dimmer and alarm acknowledge. The gyro assembly carries the Tokyo Keiki label GX162W4SF, made in Japan. The TG-6000 provides NMEA 0183-compatible heading data to autopilot, radar, ECDIS, AIS and VDR. Supplied refurbished by SM MARINE SERVICE™, Chattogram, Bangladesh, with worldwide shipping. Control units, inverters, brush assemblies and PCBs also available.


SM MARINE SERVICE™ – Marine Automation & Navigation Equipment Supplier

Available Equipment Conditions: New • Used • Refurbished • Reconditioned (Specific product condition and availability are subject to confirmation.)

Stock Locations: Bangladesh • China

Services: Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing

Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh

Mobile / WhatsApp / Viber: +88 01818 929292

Email: info@smmarineservice.com

Website: https://www.smmarineservice.com/

Need a Tokyo Keiki TG-6000 gyrocompass or spare part? Send us your label photo today for a fast quotation.


BDT:

0

-
+

Related products

JRC ECHO SOUNDER MODEL: JFE 582

BDT 0

JRC ECHOSOUNDER JFE-380

BDT 0

JRC ECHO SOUNDER JFE 582

BDT 0

Furuno Voyage Data Recorder (SVDR) VR-3000S

BDT 0

SM Marine Service

SM Marine Service

Marine Equipment Supplier

Welcome to SM Marine Service! How can we help you today? 2:21 PM
Need Help? Chat with us