SAACKE Burner Controller
SAACKE GmbH
New product
Manufacturer: SAACKE GmbH
Country of Origin: Germany
Product Type: Burner / Load Controller and Boiler Control Interface
Marine Application: Marine boiler burner control, thermal oil heater automation, combustion control, burner load regulation, and alarm / operating interface for SAACKE burner systems
The product shown in your image is the SAACKE RSE-P II compact controller, a well-known control unit used in SAACKE marine boiler and burner systems. It is commonly installed on shipboard auxiliary boilers, exhaust gas boilers, thermal oil heaters, and burner management panels where stable combustion control and burner load regulation are required.
The RSE-P II is used as a controller / operating interface for SAACKE combustion systems. Technical references and available manuals describe it as a compact controller with LCD display, front keypad operation, parameter setting capability, alarm handling, analog input support, and relay / analog output functions for burner process control.
SM MARINE SERVICE™ supplies marine boiler automation spare parts like the SAACKE RSE-P II for replacement, repair support, and shipboard maintenance planning.
The SAACKE RSE-P II is essentially a burner / load controller used to control and supervise combustion-related functions in SAACKE burner systems. Depending on the boiler arrangement, it may handle or assist with:
Available technical descriptions show that the RSE-P II supports PID-based control, display-guided parameter setting, analog inputs, binary inputs, relay outputs, and optional analog output / interface functions for burner process control.
Key features associated with the SAACKE RSE-P II include:
In practice, this controller is valuable because it allows marine engineers to adjust and monitor burner control functions directly from the panel without replacing the entire burner management system.
A typical SAACKE RSE-P II setup includes:
Depending on the boiler system, the RSE-P II may work together with:
The SAACKE RSE-P II is commonly found in marine systems such as:
For ship managers and chief engineers, this controller remains important because many vessels still operate with established SAACKE boiler systems where original spare parts are required for reliable operation.
Possible causes: power supply failure, blown fuse, loose terminals, internal controller fault.
Check: verify supply voltage, terminal condition, and upstream control power.
Some field cases and technical references mention controller memory / parameter issues.
Check: verify saved parameters, compare with boiler commissioning records, and confirm correct configuration after replacement.
Possible causes: incorrect setpoint input, failed analog signal, output relay issue, burner interlock active, wrong controller settings.
Check: review alarm status, process input values, and connected actuator / burner command circuit.
Possible causes: faulty field sensor, limit switch issue, wrong parameterization, signal scaling problem, communication issue with associated boiler control devices.
Check: inspect input signals, safety chain, and recent changes in settings.
To keep the SAACKE RSE-P II reliable onboard:
If your vessel uses multiple SAACKE burners, keeping one tested spare RSE-P II onboard can reduce boiler downtime significantly.
Many ships continue to use the SAACKE RSE-P II because SAACKE boiler systems are robust, widely installed, and often remain in service for many years. Replacing a failed controller with the correct spare is usually faster and more economical than redesigning the entire boiler automation system. For this reason, the RSE-P II is still a valuable marine boiler spare part for operators maintaining older SAACKE combustion systems.
What is the SAACKE RSE-P II used for?
It is used as a burner / load controller and operator interface in SAACKE boiler and combustion control systems.
Is it used on ships?
Yes. It is commonly found in marine auxiliary boiler and thermal oil heater systems.
Can the RSE-P II be replaced by any generic controller?
Normally no. Marine engineers usually need to match the original SAACKE controller type, voltage, and configuration to avoid burner control problems.
What should be checked before ordering a replacement?
Send the front photo, side label / part number, supply voltage details, and if possible the vessel boiler / burner model.
The SAACKE RSE-P II is a compact burner controller and operator interface used in marine boiler automation systems. It is widely applied in SAACKE burner installations for combustion control, burner load regulation, alarm handling, and process monitoring. For vessels operating SAACKE boiler plants, the RSE-P II remains an important replacement spare for maintaining reliable burner performance.
Marine Automation & Navigation Equipment Supplier
Available Condition:
• New Equipment • Used Equipment • Refurbished Equipment • Reconditioned Equipment
Stock Location:
• Bangladesh • China
Services:
• Worldwide Shipping • Technical Support • Spare Parts Supply • Marine Equipment Sourcing
SM MARINE SERVICE™ Samir Market, DT Road, Pahartali, beside CDA Market, Chattogram, Bangladesh
Mobile / WhatsApp / Viber: +88 01818 929292
Email: info@smmarineservice.com
Website: www.smmarineservice.com
0
BDT 0
BDT 0
BDT 0
BDT 0
Marine Equipment Supplier